Part Location Diagram of 421333-4 Makita Rubber Tire
See part 32 in the diagram
Replacing your Makita Band Saw Rubber Tire
( Grid squares measure 1x1 inch )

Rubber Tire 421333-4

Manufactured by:
Makita
ERP Number:
ERP10151048
Part Number:
421333-4
Original Equipment Manufacturer ?
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(6 rated repairs) ?

Does this part fit my model?

Need help finding your model number?

Product Description

?

Genuine Manufacturer Approved replacement Wheel Tire for some Makita Bandsaws. This part is made out of Rubber and is Sold Individually. When putting the tire on a band saw Wheel, it may seem too small but it is not. Band saw Tires will typically come approximately 2 or more inches smaller than the Tire you're replacing. The old Tire stretches over time thus becoming less effective and eventually will break. Also, as Tire ages the rubber hardens and allows the Blade to slip. You would need to put the New Tire in Hot/Warm Water to heat the tire enough to make it pliable enough to stretch. Its preferred to use two people in the stretching process.

Frequently Purchased Together

?

Troubleshooting

This part works with the following brands:
  • Makita
This part works with the following products:
  • Band Saw
  • Saw

Videos For installing this part.

?
Replacing your Rubber Tire
Replacing your Rubber Tire

Customer Part Reviews

?
5.0
Average Rating (out of 5):
★★★★★
★★★★★
(3 Reviews)
Click to filter by ratings:
  • 5 stars
    3
  • 4 stars
    0
  • 3 stars
    0
  • 2 stars
    0
  • 1 star
    0
  • 1
Sort by:  
Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(6 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Tires worn

Steven from Santa Clara, California

3 of 3 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
421333-4, 45-69-0010
Removed the old rubber tires, then simply stretch the new ones on.
Did you find this story helpful?
Thank you for voting!

Blade wiuld not track

mike from Pompano Beach, Florida

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
Parts Used:
421333-4, 210033-9
1- Removed old worn out wheel tires
2- Slipped the new tires on
3- Removed the guide rollers with phillips head screwdriver
4- Replaced the bearing rollers
5- Reattach the holder assembly to the housing
Did you find this story helpful?
Thank you for voting!

Rubber tire on band saw broke

David from Wheat Ridge, Colorado

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
421333-4
Stretched the new rubber tire on the driver wheel. No tools used
Did you find this story helpful?
Thank you for voting!

rubber came off and was misplaced

Kent from Mililani, Hawaii

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
421333-4
stretched band on the wheel
Did you find this story helpful?
Thank you for voting!

Band saw rubber tires were old, hard and slippery. The blade would slip off under pressure

Jose from San Juan, Puerto Rico

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Parts Used:
421333-4
Removed the drive wheels with an Allen wrench. Then pulled off the old tires from the wheels. Matched the grooves on the tires with the grooves on the drive wheels and worked then into position, then replaced the drive wheels then the saw blade.

Not very complicated just a little patience. And maybe a little pinch now and th en.
Did you find this story helpful?
Thank you for voting!

the rubber tire spllit

joseph from KAUKAUNA, Wisconsin

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Pliers
Parts Used:
421333-4
Loosen the tension. loosen the disc. replace the tire. replace the disc with the tire on, tighten the bolt with a allen wrench. Move the tensioner to full tension.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10151048
Manufacturer Part Number: 421333-4
Brand Model Number Description
Makita 2106 Band Saw - Band Saw
Makita 2107F Band Saw - Portable Band Saw
Makita 2107FK Band Saw - Portable Band Saw
Makita 2107FZ Saw - Saw
Makita 2107FZK Saw - Saw
Makita BPB180 Band Saw - Portable Band Saw
Makita BPB180F Saw - Saw
Makita BPB180Z Band Saw - 18V LXT Lithium-Ion Cordless Portable Band Saw
Makita XBP02 Band Saw - 18V LXT Lithium-Ion Cordless Compact Band Saw Kit
Makita XBP02TX Saw - Saw
Makita XBP02Z Band Saw - 18V LXT Lithium-Ion Cordless Portable Band Saw