Sorry, we couldn't find any existing reviews that matched. Try using some different or simpler keywords.
★★★★★
★★★★★
Perfect fit, more heavy duty
Hardest part was cutting the old one out. After that setting the old pins back in the new one was easy. The blade tracks much better now.
Guest - September 2, 2019
Verified Purchase
★★★★★
★★★★★
perfect fit, easy fix to existing problem
Part was great, fit nice, the repair process was reasonably easy and quick
Guest - September 30, 2019
Verified Purchase
★★★★★
★★★★★
Great
My bandsaw is pretty old didn’t think I would find the right part had to modify just a bit but it was well worth it. Great company fast shipping couldn’t ask for an better
Guest - December 28, 2019
Verified Purchase
★★★★★
★★★★★
Fast service
Fast service and the part actually works
Oliver - January 8, 2020
Verified Purchase
★★★★★
★★★★★
The part I needed was in stock!
My saw is very old, and I was certainly pleased that eReplacementParts had a suitable part in stock for me. I really don't know who else in the world I could have found who carries parts like this.
Phelps - May 26, 2020
Verified Purchase
★★★★★
★★★★★
This part worked great on my brand saw.
Part Work great arrived on time.
Guest - July 28, 2020
Verified Purchase
★★★★★
★★★★★
Thanks, great doing business with you'all
Much better design than the original part that broke! Happy with it, saw is like new again.
James - September 2, 2020
Verified Purchase
★★★★★
★★★★★
great part
Much higher quality than the one from the original manufacturer
Guest - October 2, 2020
Verified Purchase
★★★★★
★★★★★
easy to find, it is the right part.
a good product, well made.
Guest - July 29, 2021
Verified Purchase
★★★★★
★★★★★
Super easy and fast
Easy ordering after rep help me find correct part.
Thank you!
Mike M
Michael - June 21, 2023
Verified Purchase
< Prev
1
2
Next >
Questions & Answers
?
Our customer Service team is at the ready daily to answer your part and product questions.
We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Disassembled upper saw housing and removed hinge assembly. Cut broken part to remove pin that holds assembly in housing. Save the pins to reuse in new piece. Reassembled new hinge into housing. Used vice to compress pins into place. Then reassemble upper saw housing and adjust.
Did you find this story helpful?
Thank you for voting!
Put to much stress on blade tension adjustment and snapped part
The old part does not \"disassemble\" it needs to be cut out on the inside of the pivot pins. The square housing that holds this part in is aluminum and is fragile. Use a cut off wheel to remove the center of the broken part. Use the new part as a reference of how deep the pivot pins go, and don\'t cut the pins. That is the hardest part o
... Read moref the whole job. Once the broken part is cut out, remove the pins and reinstall them into the new part through the old square housing with a hammer and punch. Careful to hold the square housing in a vise to set the pivot pins. The new part that I received seems to be a better manufacture than the original. More \"beefy\".
Remove saw blade
Remove upper wheel
Remove blade guard/guide
Remove upper wheel guard
Remove hinge assembly
Remove hinge from assembly
Reverse process
Align wheel and check for blade tracking
First you must remove the upper wheel from the shaft assembly. A single nut and washer allows the wheel to be removed. Then remove the 2 screws that secure the wheel hinge assembly to the upper shroud. You will then be able to lift the complete upper wheel tensioning assembly off. There are 2 small pivot pins that must be removed from the
... Read more hinge assembly and that\'s all there is to it. Reverse the sequence and you\'re back in business.
I had to \"dress\" the area around the 2 pivot pins with a file in order for the assembly to drop into place. Not a big deal. It took no more than a couple of minutes to complete.
The quality of the new part was much better than the original.
The replacement part was a perfect fit. The installation was complicated by the dowel pins which were both press fit into the assembly. Since they were pressed in blind holes there was no option to drive them out with a punch. The extra time and difficulty involved cutting through the casting with a Dremel tool to release the pins so the
... Read morebroken assembly could be replaced. The dowel pins could be reused and assembly went smooth from there.
Drilled hole in old hinge and drove out hingepins.Made new pins from xacto knife handle turned them down on the lathe.Reassembled saw put blade on wheels and adjusted new hinge for proper blade alignment. Saw runs perfect.Not bad for a dump find.
Fit perfect for my Sheng Tsai 14GÇ¥ bandsaw.
Only thing was I had to knock out the mounting pin on the old one and cut them to size for the new one.
No big deal.
Slap the nut holding the pulley was a different thread size.
Had one in my junk drawer. Works great.
1) remove upper wheel cover
2) loosen saw band and remove the blade
3) slide hinge and bracket assy up and out of the frame.
4) remove the two retaining pins and remove broken hinge.
5) reverse procedure to reassemble.
Removed everything to get to assembly. Used grinding wheel to cut out pins. After they heated up with the grinder they fell out. Installed old pins to new assembly. Reinstalled machine and it worked great after a few adjustments. Glad to have my bandsaw up and running again
Did you find this story helpful?
Thank you for voting!
band saw
Derrick from Vancouver, Washington
0 of 1 peoplefound this instruction helpful.
Difficulty Level:
Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers, Wrench (Adjustable), Wrench set
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of JT9-A100019 Jet WHEEL HINGE ASSY WBS-14")
_WW_1.gif "Part Location Diagram of JT9-A100019 Jet WHEEL HINGE ASSY WBS-14")
