I already had remloved the table when the pieces were noticed. When the trunnions arrived, I loosely bolted both to the under side and placed it back place, tightened front and back knobs Then check for squareness to the blade and mtightened the six bolts holding the trunnions in place.
Took table off - turned it upside down removed old trunnions with power screwdriver [three bolts each] installed new parts, replaced table and adjusted the new parts. Repair complete. Great parts fit was good
Did you find this story helpful?
Thank you for voting!
When moving the saw and loading it on a trailer it tipped over breaking the trunnions.
This was a simple repair. Removed bolts holding the broken trunnions from the table, then installed the new trunnions on. And place the scale on the trunnion facing out. What made it go so well was the new parts were an exact replacement part.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19124481
Manufacturer Part Number: JT9-100051
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of JT9-100051 Jet SCALE")
_WW_1.gif "Part Location Diagram of JT9-100051 Jet SCALE")
