Part Location Diagram of 10FNS Shimano Handle Nut
See part 3420 in the diagram

Handle Nut 10FNS

Manufactured by:
Shimano
ERP Number:
ERP18252227
Part Number:
10FNS
Original Equipment Manufacturer ?
  Works with your model  CIS151A!
$6.16
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(1 rated repair) ?
  Works with your model   CIS151A!

Product Description

?

This is an authentic Shimano replacement part that has been sourced from the original manufacturer to be used with baitcasting reels. The handle nut fits on the outside of the handle and is used to secure the handle to the drive shaft assembly. This item is available as an individual replacement part. A hex socket wrench may be needed to install this item.

Troubleshooting

This part works with the following brands:
  • Shimano
This part works with the following products:
  • Baitcast Reels

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Got my reel serviced at Shimano when i got it back i went to use it and noticed my handle was wobbling. Found out my handle nut had been stripped out and not replaced. Lesson learned, do your own repa

Jon from WILDOMAR, California

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers, Socket set
Parts Used:
10FNS
Make sure the pinion gear assembly is in the right order then attach handle nut counter clockwise on the end of pinion gear.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18252227
Manufacturer Part Number: 10FNS
Brand Model Number Description
Shimano CAE-101 Baitcast Reels - Caenan Baitcast Reel
Shimano CAE151A Baitcast Reels - Baitcasting Reel
Shimano CAIUS-201 Baitcast Reels - Caius Baitcast Reel
Shimano CH-101BPV Baitcast Reels - Chronarch Low-Profile Baitcasting Reel
Shimano CH-101BSV Baitcast Reels - Chronarch Low-Profile Baitcasting Reel
Shimano CH-101SF Baitcast Reels - Chronarch Low-Profile Baitcasting Reel
Shimano CI-201D Baitcast Reels - Citica Low-Profile Baitcasting Reel
Shimano CIS151A Baitcast Reels - Caius Baitcasting Reel
Shimano CU-101D Baitcast Reels - Curado Low-Profile Baitcasting Reel
Shimano CU-201DHSV Baitcast Reels - Curado Low-Profile Baitcasting Reel
Shimano CU-201DPV Baitcast Reels - Curado Low-Profile Baitcasting Reel