Part Location Diagram of 10589 Shimano Spacer
See part 1230 in the diagram
( Grid squares measure 1x1 inch )

Spacer 10589

Manufactured by:
Shimano
ERP Number:
ERP18247063
Part Number:
10589
Original Equipment Manufacturer ?
  Works with your model  CT150!
$6.16
Special Order

Easy 

Less than 15 mins 

(1 rated repair) ?
  Works with your model   CT150!

Product Description

?

The special spacer is a genuine Shimano replacement part that is manufactured for use with baitcasting reels. This special spacer is commonly used to provide spacing between the drive shaft bushing and the e-clip. This spacer is available as an individual replacement part, please see illustrated part list for associative parts.

Troubleshooting

This part works with the following brands:
  • Shimano
This part works with the following products:
  • Baitcast Reels
  • Conventional Reels

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Drag washers (belleville concave washers ) worn out

greg from QUINCY, Washington

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
10589, 1052C, 1052B
Remove left side plate, remove rel spool, slide old washers off shaft, slide new washers onto shaft, replace spool, replace side plate.
Note: make sure drag lever is in free spool, to release all pressure on the spool. Not possible to replace spool with pressure on shaft..
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP18247063
Manufacturer Part Number: 10589
Brand Model Number Description
Shimano CT-100 Baitcast Reels - Calcutta Round Baitcasting Reel
Shimano CT-100B Baitcast Reels - Calcutta Baitcast Reel
Shimano CT-101B Baitcast Reels - Calcutta Baitcast Reel
Shimano CT-200B Baitcast Reels - Calcutta Baitcast Reel
Shimano CT-201B Baitcast Reels - Calcutta Baitcast Reel
Shimano CT-251 Baitcast Reels - Calcutta Round Baitcasting Reel
Shimano CT150 Baitcast Reels - Calcutta Round Baitcasting Reel
Shimano CT200GTB Baitcast Reels - Round Baitcasiting Calcutta B
Shimano TLD1530S Conventional Reels - Tld Drag Reel
Shimano TLD2040S Conventional Reels - Tld Drag Reel
Shimano TR-100G Conventional Reels - Tr Drag Reel
Shimano TR-200G Conventional Reels - Tr Drag Reel
Shimano TRN100G Conventional Reels - Tr Star Drag Conventional Reel
Shimano TRN200G Conventional Reels - Tr Star Drag Conventional Reel