General Electric Washer Switches

This genuine OEM lid lock and striker is designed for washing machines. The lid lock comes with the wiring harness and striker, which is a small plastic piece attached to the lid of the washing machine. When the lid is closed, the striker aligns with and engages a corresponding latch on the washing machine. The lid lock mechanism prevents the washer from starting or operating while the lid is open...

A door switch is a simple on/off mechanism that prohibits the dryer from operating when the door is open.

This part is a simple on/off mechanism that prohibits the appliance from operating when the door is open.

The pin on the lid pushes on the lever of the lid switch to tell the machine that the lid is closed.

This dryer door switch is a safety component that detects when the door is fully closed, allowing the dryer to start and operate properly. It automatically prevents the appliance from running if the door is open, helping protect users and ensuring safe operation during each cycle. This switch is commonly replaced when a dryer will not start, stops unexpectedly, or when the interior light fails to ...

The water level pressure switch in your washing machine is a very important part, as it senses and regulates the water level within the washer. If you notice that the water level in your washing machine seems off, you may need to replace the water level pressure switch. Be sure to disconnect the power and water sources from your washing machine before you complete this repair.

Also known as a Rotary Switch. This part regulates the temperature of the water in the tub.

This switch keeps your washer from overflowing. It is responsible for shutting off the power to the fill valve and redirects the power to the timer to start the washing machine running once the correct water level has been reached.