Frigidaire Washer Valves

This OEM water inlet valve assembly with flow meter fits select Frigidaire, Electrolux, White Westinghouse, and Tappan washers. It regulates water flow for efficient operation and energy savings. Unplug the washer and shut off the water supply before installing. Refer to your owner’s manual for model-specific guidance. Verify compatibility before ordering.

This part comes with the sensor/thermistor.

This water inlet valve works with washers

This washing machine water inlet valve has two ports for water to enter.

This water inlet valve controls the flow of water into your appliance, ensuring proper filling during wash cycles. Ideal for replacing a faulty valve that causes leaks or filling issues, it restores efficient operation. Installation involves disconnecting power and water supply, removing the old valve, and securing the new one in place.

This washer water inlet valve controls the flow of hot and cold water into the machine, helping ensure proper fill levels, temperature balance, and consistent wash performance. Using electrically operated solenoids, it opens and closes based on the selected cycle to regulate water intake. Replacement is recommended if the washer is slow to fill, not filling at all, leaking, or experiencing inconsi...

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

This water inlet valve attaches the water lines to the back of your appliance. The attaching solenoids on the valve open and close according to the desired temperature, or amount of water needed.

This washer water inlet valve regulates the flow and temperature of water entering the machine, using a durable triple-coil design to direct both hot and cold water into the tub and dispenser compartments throughout the wash cycle. Built primarily from metal and equipped with compression-style inlet and outlet connections, it is rated for 120 volts at 60Hz and features a single-port configuration ...

This 3-way water inlet valve controls the flow of hot and cold water into the washing machine, ensuring the correct temperature and water levels for each cycle. Designed with multiple solenoids for reliable regulation, it supports consistent wash performance. Replacing a faulty valve can resolve issues such as slow filling, incorrect water temperature, or leaks, helping restore proper operation.

This valve manages the controlled delivery of water or gas required for appliance operation. By ensuring proper flow and shutoff, it supports both performance and safety and is replaced when leaks, blockages, or flow irregularities develop.

This assembly controls water intake while monitoring temperature to support efficient and accurate operation. Combined regulation and sensing help maintain consistent performance. Replacing a faulty unit restores dependable water flow and temperature control.

These valves are where the water supply from the house attach to the washing machine. You connect the hoses to the valve with fill hoses. The fill hoses should have screens installed in them to prevent debris from entering the valve and causing it to stick open or closed. Sometimes these valves are called mixing valves, because they essentially mix the cold and hot water together to create “war...