Estate Washer Hoses and Tubes

This part is the replacement water inlet hose for your washer. It is black in color, made of plastic, and is approximately 19 inches long. The water inlet hose connects the water inlet valve to the water fill nozzle. Over time the hose can become cracked and damaged, and this can cause it to leak. A damaged hose will need to be replaced. Be sure to disconnect the water supply to the washer before ...

This hose goes from valve to inlet.

This kit comes with the clamps.

This drain hose is 42" long and includes the clamps.

This hose can handle hot or cold water and is five feet long.

This part prevents water from flowing back into your main water supply line.

It connects from the pump to the back panel. The clamp is not included.

Used to drain water.

This is the hose that tells your appliance if your tub is at the desired water level.

This drain hose is 10 feet long and comes with a clamp.

This part includes the spin tube "T" bearing, spacer, shaft pinion seal and another shaft seal.

3’ 6” long with a goose neck of about 6”. Comes with 4 clamps, hose couplers, and instruction sheet.

This six piece washing machine syphon break kit for is intended for use with plastic drain hoses. Use this kit with your Whirlpool/Kenmore brand washing machine.