Crosley Washer Hoses and Tubes

The drain hose carries used water from the washer to your house drain.

The tub-to-pump hose carries the water from the tub to the drain pump. Unplug the washer and shut off the water supply before installing this part. Wear work gloves to protect your hands

This washer tub-to-pump hose, often called a coin trap or bellows hose, carries water from the outer tub to the drain pump during drain and spin cycles. Designed with an integrated trap, it captures coins, buttons, and other small debris to prevent damage to the pump. Made from durable black rubber or flexible plastic, it withstands high water pressure and constant vibration. Common signs of failu...

This part is the replacement water inlet hose for your washer. It is black in color, made of plastic, and is approximately 19 inches long. The water inlet hose connects the water inlet valve to the water fill nozzle. Over time the hose can become cracked and damaged, and this can cause it to leak. A damaged hose will need to be replaced. Be sure to disconnect the water supply to the washer before ...

This hose goes from valve to inlet.

This kit comes with the clamps.

Used with some portable dishwashers and washers. NOTE: As per the factory, this is used for faucets with inside or outside threads. For female connection (outside) just remove the washers.

This drain hose is 42" long and includes the clamps.

This hose can handle hot or cold water and is five feet long.

This part prevents water from flowing back into your main water supply line.

It connects from the pump to the back panel. The clamp is not included.

This drain hose, used in washing machines, delivers water from the drain pump to the house drain. The hose is 7 1/2 feet (90 inches) long. If your hose is leaking, it is best to replace it with a new one. To repair it, first access the back of the washer and remove the clamp holding the hose. Switch the clamp onto the new hose before placing it back into the fitting. Refer to the manual provided b...

This hose attaches to the pump to help remove the water out of the washer. 7 feet in length.

This washer tub-to-pump hose is designed to carry wastewater from the tub to the drain pump during wash and spin cycles, helping ensure efficient draining. It also includes a built-in trap that catches small items like coins or debris, helping protect the pump from damage. Made from durable rubber, it is an ideal replacement if the hose becomes cracked, blocked, or starts leaking, restoring proper...

Also known as tub-to-pump drain hose.

Used to drain water.