Admiral Washer Springs and Shock Absorbers

This suspension spring is used to support and balance the outer tub of your washer. The spring is sold Individually.

This washing machine suspension rod kit includes 4 suspension rods, 4 suspension balls, and 4 bushings to stabilize the washer tub and minimize vibrations during operation. If the washer shakes or vibrates excessively, replacing the suspension rods may resolve the issue. Installation requires safety precautions, such as unplugging the appliance and wearing work gloves.

This part is used to balance the tub during spin cycle. Sold individually.

Suspension springs for washing machines are essential for absorbing vibrations and movements during the spin cycle. They support the outer tub and keep it steady during loads, preventing excessive shaking, noise, and leaks. This is a kit of 4 suspension springs.

This suspension spring is used with many washing machines. It is made entirely of metal and is seven inches long.

This package of pads contains three tub wear pads.

This spring is used on the leveling components in a washer. Please note, this spring may differ in appearance, but functions the same as original.

These parts are the replacement suspension rod supports for your washer. They are made of plastic and are approximately 1 ½ inches in diameter. This package will come with an 8-piece set of suspension rod supports. There are 4 of each type. Be sure to consult the parts diagram for your washer for the complete list of parts included. The suspension rod supports help secure the suspension rods, so y...

This is a pack of three suspension pads for your washer. The suspension pads in your washer are found underneath the tub and prevent the rotating metal parts from grinding on one another. If your suspension pads are worn out, you will likely hear metal-on-metal grinding, which is an indication they need to be replaced. It is recommended to replace all three suspension pads at the same time.

This package contains a new set of six springs. The suspension springs in your washer connect to the bottom of tub, and help to hold it in place. If your washer tub shakes, or moves around a lot during operation, it could mean that one or more of your springs are damaged or stretched. You will need to access the bottom of the tub for this repair by removing the front (and possibly the rear) panel....

This kit includes 3 springs.

This part is the replacement motor pivot spring for your washer. It is made of metal and is approximately 3 inches long and 2 inches wide. The motor pivot spring helps hold the drive motor in the correct position on the motor plate. If your drive motor shakes during use, if the pumps will not operate, or if your washer is excessively loud during operation, you may need to replace the motor pivot s...