Magic Chef Refrigerator Ice Makers

This genuine OEM ice maker kit is designed to fit refrigerators that did not originally come with an ice maker. This kit contains everything needed to install the new ice maker on your refrigerator including: the ice maker, ice bin, inlet valve, fill tube, and hardware. If your new ice maker does not function properly after being installed, check the freezer temperature. The freezer must to be aro...

Bucket only.

This is the replacement ice maker auger and crusher blade assembly for your refrigerator. It is approximately 15 inches long and 7 inches wide. The ice maker auger sits within the ice maker assembly and rotates to push the ice from ice container into the dispenser chute. If your ice maker bucket is full, but ice is not being dispensed, it is an indication that the auger is damaged. Be sure to disc...

This helix end cap is almost four inches in diameter. It is all white in color and is made of plastic. This end cap is used in a refrigerator's icemaker.

This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.

This ice dispenser yoke is an inch and a half long. It is made of metal and is used with the ice enclosure of a refrigerator's icemaker assembly.

Holds the ice when it's released by the ice maker.

This 48 cube ice cube tray is eleven inches long. It is all white in color and it is made entirely of plastic.

This part strips ice from the icemaker mold during the ejection cycle to prevent ice pieces from falling back into the mold.

This is the icemaker only. You must use the wire harness, cover and bail arm from the original icemaker.

This part holds and supports the bucket that holds the ice when dropped from the icemaker.

This arm is used to eject the ice from the icemaker into the bin.

This part rotates the auger to dispense ice.

Sold individually.

This kit comes with ducts, a water fill tube, and the hardware needed to install the icemaker. It replaces the old twist-tray style of icemaker.