Jenn-Air Refrigerator Elements and Burners

This set includes two nine and a quarter inch radiant glass defrost heaters joined together with wire. Each heater carries 500 watts and 115 volts. The defrost heater heats the evaporator in the defrost mode of operation to keep the cooling coils from frosting over.

This part assembly has 2 functions: The defrost heater keeps the cooling coils from frosting over and the thermostat senses that the heat near the cooling coils has reached the desired temperature.

This part assembly has 2 functions: The defrost heater keeps the cooling coils from freezing and the thermostat can tell that the heat next to the cooling coils has reached the desired temperature.

The defrost heater keeps the cooling coils from frosting over.

The defrost heater is similar to the burners on an electric stove. It's located just beneath the cooling coils, which are concealed behind a panel in the freezer compartment. The heater gets hot. And, because it's close to the cooling coils, any ice or frost build-up melts.

The defrost heater keeps the cooling coils from frosting over

This radiant glass defrost heater is eighteen inches long. It comes with an instructions sheet, and is intended for use with the freezer evaporator of some refrigerators.

This defrost heater is a replacement heating component designed to melt frost buildup and maintain efficient operation. It supports consistent cooling performance and is commonly replaced when frost accumulation increases or defrost cycles fail.

The heater is located beneath the coils that are located behind the panel in the freezer section. The heater will get hot and melt any ice or frost build up around the coils. The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

There are two defrost heaters in this kit. Each is twelve inches long.

This part assembly has 2 functions: The defrost heater keeps the cooling coils from frosting over and the thermostat senses that the heat near the cooling coils has reached the desired temperature.

This radiant glass defrost heater is twenty and a half inches long. It comes with an instructions sheet, and is intended for use with the freezer evaporator of some refrigerators.

This heating element generates and maintains the required heat needed for proper appliance operation. Designed for reliable and consistent performance, it restores proper heating when the original element no longer warms effectively, helping ensure accurate temperatures and dependable results during use.

This refrigerator defrost heater melts frost from the evaporator coils during the automatic defrost cycle, helping maintain proper airflow and consistent temperatures in both the refrigerator and freezer. When this component wears out, you may notice temperature fluctuations, frost buildup, or the appliance running longer than usual. Designed for select refrigerator models, it restores efficient c...