Frigidaire Refrigerator Switches

This part turns the light on/off as the door opens and closes.

This micro switch is a replacement electrical component that detects position or movement and sends signals to control functions. It is commonly replaced when an appliance does not respond correctly to door or control actions. Proper application should be verified prior to installation.

Water that fills your dishwasher lifts the float. When it reaches a certain level, the float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.

This is a light/lamp switch for your refrigerator. It activates the light when the door of the appliance is open. You might need to replace this part if the light in your appliance is currently not working properly. The tools you will need to make this repair include a nut driver set, a slot screwdriver, and work gloves. This model is white and measures 1.5 square inches.

Ensure reliable compressor startup with this compressor start relay, designed to deliver the initial electrical boost needed to get the cooling system running. Once engaged, it helps regulate power to maintain efficient compressor operation and consistent cooling performance. Built for dependable use, this component supports proper appliance function and can help resolve issues such as startup fai...

This is the replacement light switch for your refrigerator. It is white in color and is approximately 2inches long and 1 inch wide. If the light is not working or stays on, you may need to replace the switch. It is an OEM part, directly from the manufacturer. Be sure to disconnect the refrigerator from the power source before you begin this repair. To remove the switch, simply use a flathead screw...

This is a switch for your refrigerator, but you may also know it as a door switch or a plunger light switch. This part turns your appliance light on and off as the door is opened and closed. If your current light does not turn on, it will need to be replaced. To make this repair you will need a Phillips head screwdriver, a putty knife, and a flat head screwdriver.

This part turns the light on/off as the door opens and closes.

This light switch controls interior lighting by activating when the door is opened or closed. It is commonly replaced when the light fails to turn on or off properly, helping restore correct lighting operation.

This part allows the cold air from the freezer section to be aired into the fresh food section and it is controlled by the thermostat.

This refrigerator and freezer door reed switch magnet helps the appliance detect when the door is opened or closed. Designed as part of the door sensing system, it supports proper operation of interior lights, cooling functions, and door alarm features. This part may need replacement if the refrigerator fails to recognize the door as closed, causing issues such as interior lights staying on, tempe...

Compressor start relay kit is an original equipment manufacturer (OEM) part that fits some Kenmore, Frigidaire, Electrolux, Crosley, Gibson and White-Westinghouse refrigerators. It also fits some Kenmore, Frigidaire and Gibson upright freezers. Compressor start relay kit includes the compressor start relay, run capacitor, wire harness adapter, 2 wire terminals, 2 wire connectors, 2 pieces of wi...

This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

This refrigerator dispenser switch assembly is a genuine OEM replacement that restores proper operation of the water and ice dispenser controls. Featuring four tactile buttons, it allows users to easily select dispenser functions such as water, cubed ice, and crushed ice, while supporting built-in indicator lighting where applicable. Designed for a precise fit, this assembly helps ensure responsiv...

This door position and latch magnet is a small yet essential component designed to help detect and secure the closed position of a refrigerator or freezer door. Working with an internal sensor, it signals the control system when the door is shut while also providing magnetic holding force to keep the door sealed tightly against the cabinet. This helps maintain consistent internal temperatures, pre...