Estate Refrigerator Ice Makers

This automatic ice maker assembly is designed to produce ice by filling with water, freezing it, and ejecting the cubes into the storage bin without manual effort. Installed in the freezer compartment, it operates continuously once connected to the water supply, providing a steady supply of ice for everyday use. Replacing a worn or malfunctioning ice maker restores reliable ice production, helps p...

This is the icemaker only. You must use the wire harness, cover and bail arm from the original icemaker. This is an icemaker for your refrigerator/freezer. Take note that this part does not include the front cover, the wire harness, or the shut-off arm. These must be ordered separately or recycled from your old unit. This unit as a whole will allow your appliance to produce ice. This model makes ...

This ice guide is located in the freezer door.Turn off the ice dispenser before replacing this part.

This part is used to help tell the icemaker what to do - it turns the timing cams and the ejector blades. Motor is not sold separately.

This genuine OEM ice maker kit is designed to fit refrigerators that did not originally come with an ice maker. This kit contains everything needed to install the new ice maker on your refrigerator including: the ice maker, ice bin, inlet valve, fill tube, and hardware. If your new ice maker does not function properly after being installed, check the freezer temperature. The freezer must to be aro...

This ice bin collects the ice cubes dropped from the icemaker. The auger is NOT included with this bin.

This white ice bin auger drum comes with a washer.

This kit includes the module motor, ejector arm, and ice stripper arm. The complete icemaker is sold separately.

This part may come with a plastic or metal auger depending on the factory. It will work with your appliance if found with the model number. (Make sure you install properly at back of ice container, because it must be engaged for the crushed ice feature to work).

This icemaker kit comes with a flat plug, wiring harness, fill tube, water inlet valve, ice bin, mounting hardware, and instructions.

This part consists of a cube and arm that upon activation opens the ice container gate and allows the ice cubes to enter into the chute and into the ice and water dispenser.

This ice cube mold and heater assembly has a flake resistant surface. It is used with modular style icemakers on some refrigerators.

This ice auger support, also known as a baffle, is a manufacturer-approved replacement part for your refrigerator ice maker. This part can become cracked or damaged, preventing your ice auger from doing its job. This repair requires extensive disassembly; take photos as you go to make reassembly easier. To replace this part, life the ice door out of the way and life the ice arm into the off positi...

This icemaker water inlet cup is three inches long. It is all white in color and is made of plastic.

This kit includes the metal auger, auger coupling and washer.

This part attaches to the drive shaft of the ice dispenser motor.