Crosley Refrigerator Thermostats

This kit includes the clip, leads and one heat shrink.

This is an authentic damper control assembly, which works with refrigerators.

If ice is building up in your freezer or if your freezer is getting too warm on the defrost cycle you may need to replace the bi-metal thermostat.

The thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

The thermostat senses that the heat near the cooling coils has reached the desired temperature.

This clip-on thermostat will sense the temperature increase in the evaporator during the defrost cycle and will cycle the defrost heater off after the ice or frost is melted.

This genuine defrost thermostat kit is a critical safety component that monitors the temperature of the evaporator coils during the defrost cycle, cutting power to the defrost heater once the coils reach a specific temperature (typically around 41°F to 47°F) to prevent overheating. Ideal for fixing issues such as excessive frost buildup, inconsistent temperatures, or continuous operation, the kit ...

This is a temperature sensing mechanism. It can sense the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted from the coils.

This part includes the seal.

This refrigerator defrost safety thermostat helps regulate the defrost cycle by monitoring the temperature of the evaporator coils and preventing overheating. It cuts power to the defrost heater when temperatures rise too high, supporting safe and efficient operation. Replacing a faulty thermostat can resolve issues like excessive frost buildup or inconsistent cooling, helping restore proper performance.

This is a temperature sensing mechanism. It can sense the rise in evaporator temperature during a defrost cycle and cycles the defrost heater off after all frost is melted from the coils.

This part is also known as the cycling thermostat and this bi-metal device controls the activation of the icemaker ejection cycle.

This thermally operated switch, controls the compressor circuit and therefore the temperature of the fresh food compartment.

This part cycles on and off regularly to keep your refrigerator cold.

This part is snapped onto the top portion of the evaporator. The thermostat sends temperature information to the processor. The defrost heater must be replaced when replacing the thermostat.

This thermostat regulates the temperature of the freezer section.

This part acts as a safety device against over-heating in case of mechanical failure.