Crosley Refrigerator Switches

This part turns on the light when the door is opened.

Door switch turns the light off when you close the door.

This includes both the run capacitor and the start relay. The capacitor helps the compressor kick on and off while maintaining a constant temperature to keep things frozen in your freezer. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

This part turns the light on/off as the door opens and closes.

This switch is located inside the dispenser.

This part controls the light.

This micro switch is a replacement electrical component that detects position or movement and sends signals to control functions. It is commonly replaced when an appliance does not respond correctly to door or control actions. Proper application should be verified prior to installation.

This is a light switch for your refrigerator. It activates when the door of your appliance is opened, and it will turn the light inside on and off. You will need to replace this part is if your light is not working properly. In order to make this repair you will need a Phillips screwdriver, a pair of needle nose pliers, and a small flat blade screwdriver. This light switch is almost 2 inches long,...

This part turns the light on/off as the door opens and closes.

In addition to the solenoid (115V), this kit also comes with a door strike and an ice door assembly. Please be advised the spring and roll pin are not included with this kit.

This is a light/lamp switch for your refrigerator. It activates the light when the door of the appliance is open. You might need to replace this part if the light in your appliance is currently not working properly. The tools you will need to make this repair include a nut driver set, a slot screwdriver, and work gloves. This model is white and measures 1.5 square inches.

Ensure reliable compressor startup with this compressor start relay, designed to deliver the initial electrical boost needed to get the cooling system running. Once engaged, it helps regulate power to maintain efficient compressor operation and consistent cooling performance. Built for dependable use, this component supports proper appliance function and can help resolve issues such as startup fai...

This is the replacement light switch for your refrigerator. It is white in color and is approximately 2inches long and 1 inch wide. If the light is not working or stays on, you may need to replace the switch. It is an OEM part, directly from the manufacturer. Be sure to disconnect the refrigerator from the power source before you begin this repair. To remove the switch, simply use a flathead screw...

This part turns the light on/off as the door opens and closes.

This light switch controls interior lighting by activating when the door is opened or closed. It is commonly replaced when the light fails to turn on or off properly, helping restore correct lighting operation.

May differ in appearance, but functions same as original. The overload protects a motor from overheating and the relay boosts the compressor.

This part allows the cold air from the freezer section to be aired into the fresh food section and it is controlled by the thermostat.

This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

This refrigerator dispenser switch assembly is a genuine OEM replacement that restores proper operation of the water and ice dispenser controls. Featuring four tactile buttons, it allows users to easily select dispenser functions such as water, cubed ice, and crushed ice, while supporting built-in indicator lighting where applicable. Designed for a precise fit, this assembly helps ensure responsiv...