Tappan Range Elements and Burners

The terminals on the element are male quarter inch spade connectors. This part is found on the bottom of the oven. Approximate size is 19 1/4 inch W X 17 3/4 inch D.

This coil element has looped terminal ends.

This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to ...

This bake element is found on the bottom of the oven.

Sold individually. This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if the coil has shorted out or the terminal block shorted, and this caused the connectors at the end to burn out. The element is set in place by springs. You will need to push the spr...

This heating element is a partially open-style bake element. Carrying 240V and 2000W, it is 19-1/4" wide by 15" long. The two 90-degree push-on male spade terminals are 13-3/4" apart.

This bake element is found on the bottom of the oven.

This part is the heatsource. This surface element is for ranges. Surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

This broil element is found on the roof of the oven and heats food. The most common reasons you would need to replace this part is due to the oven not giving off enough heat, not turning on, or not baking your food at an even temperature. This could be due to the element being burnt out or broken. Make sure to unplug the oven before you begin. You will need to remove the oven from the wall to comp...

This sealed burner delivers consistent heat output for precise cooking performance. Its design helps contain spills and simplifies cleanup while ensuring efficient flame control. Installation is straightforward for restoring your cooktop’s functionality.

This bake element is found on the bottom of the oven.

This burner cap is a replacement cooking surface component designed to distribute heat evenly across the burner. It is commonly replaced when chipped, warped, or damaged by heat exposure.

This broil element is found on the roof of the oven.

This genuine OEM oven bake burner tube assembly serves as the primary heat source at the bottom of the oven cavity, distributing gas and flame evenly to maintain consistent baking temperatures. Constructed from durable stainless steel, it is designed to withstand high-heat conditions and support reliable, everyday cooking performance. Ideal for restoring proper heating when your oven struggles wit...