Roper Range Elements and Burners

This bake element has push-on terminals and is found on the bottom of the oven.

This closed hinged style bake element is 15-3/4 inches long and 16-5/8 inches wide. The terminal depth is three inches and they are 1-3/4 inches apart.

This kit is used for electric clothes dryers, and it comes with a yellow wire nut.

This element carries 5200W and 240V. Note: This element no longer includes two terminals and two adapter leads. They must be ordered separately.

NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

The manufacturer suggests replacing the receptacle at the same time.

This element has looped terminal ends and 5-turns. This element features pigtail, looped ends. This element is 8" in diameter. This element is 2100 watts. This element coil has 5 turns. This surface element has a black centre medallion. The coil surface element supplies the heat to a cooking area on top of the range.

This broil element is found on the roof of the oven and has push-on terminals.

Please note: This is a substitute from the original part. It may physically look different, but will still function the same. This bake element is found on the bottom of the oven.

This surface burner heating element is six inches in diameter. It has four turns and looped terminal ends. Sold individually.

This bake element is found on the bottom of the oven. It has push-on terminal ends.

This 6 inch surface burner with reinforced delta frame carries 1250 watts and 240 volts. It has four turns and is compatible with many electric ranges. Its center medallion is all black in color.

This plug-in surface burner element has looped terminal ends.

This broil element is found on the roof of the oven.

This part is the replacement surface burner or element for your range. It is approximately 8 inches in diameter, and 2100 watts. The surface burner connects to the power source and when it is turned on, it heats up to cook your food. If you turn on the burner and the element does not heat up, it will need to be replaced. To complete this repair, first be sure to disconnect the power from your rang...

Sold individually.

This surface element is made for under glass set-ups and supplies the heat to a cooking area on top of the range. It has an outside diameter of approximately 7 inches (1500 watts), and is a genuine OEM part sourced directly from the manufacturer. Before you replace your faulty element, make sure the element is cool, and the power is disconnected from your range.

Sold individually.