Kenmore Range Igniters

This flat style gas oven igniter has an amperage range between 3.2 to 3.6. This part comes with two ceramic wire nuts.

This part has a long wire harness. This part ignites the gas to light the oven burner. The wire length is approximately 14 inches long.

Get your oven heating properly again with this igniter, designed to light the gas burner and start the cooking process. It delivers reliable ignition to ensure consistent oven performance and proper temperature control. Built for dependable use, this component is an ideal replacement when your oven is not heating as it should, helping restore safe and efficient operation.

The flat-style oven igniter lights the gas burner in your oven. It includes a mounting bracket, two ceramic wire connectors, and measures 3-3/4 inches long. The plug may need to be spliced to the range wiring. Always unplug the range before installation.

This gas oven bake igniter is designed to initiate the heating process by activating the burner during baking cycles. It functions by heating up until it reaches the ignition point, allowing gas to ignite and maintain consistent oven temperatures. A failing igniter is a common cause of heating issues, including longer preheat times, uneven baking, or complete failure to heat. Replacing the igniter...

This gas range oven igniter is compatible with various models of LG gas ranges. It is made up of the igniter element, wire harness, connector and mounting bracket. The igniter is responsible for generating the heat needed to ignite the gas and create a flame for you to cook your food. You can find the igniter located near the oven burner. If your igniter is faulty, you will likely notice that it d...

Be very careful when handling this igniter as it is very fragile.This igniter has a range of 2.5 to 3.0 amps. Note: This will not replace the flat style igniters. Also known as bake and broil igniter.

The oven bake igniter is essential for gas ovens with Direct Spark Ignition (DSI) systems. It is responsible for igniting the gas to light the bake burner. Be sure to turn off both the circuit breaker and gas supply before replacing this part. Always wear work gloves for safety and verify that this igniter is compatible with your oven model before making your purchase.

This part helps your burner ignite and produce flame.

This genuine OEM oven broil igniter kit is designed to reliably ignite the gas burner, restoring proper heating performance to your appliance. Featuring a durable flat ceramic construction with an integrated half-shield, it helps protect the igniter while ensuring consistent ignition. The included 18-inch wire leads provide flexibility for installation, making it a convenient replacement for a wor...

This igniter has a short wire harness. The wire length is approximately 6 inches long.

This round style carborundum gas oven igniter has 10 inch lead and amperage range between 2.5 and 3.0 amps. Be very careful when handling this igniter as it is very fragile. Please note - The bracket and screws are not included. This part will not replace the flat style igniters. Also known as bake and broil igniter.

Use this igniter with sealed burners.

The function of the ignitor in your range is to create the spark that ignites the gas on the burners. If your spark ignition system is not functioning properly, you may need to replace the ignitor. This part is approximately 3 inches in length. The ignitor is located in the rear of the range, so you will need to remove the back panel in order to access it for this repair. Before beginning this rep...

This is the replacement spark igniter or surface burner igniter for your range. This igniter has a blue tube, but the tube can come in a variety of colors, and still do the same job. The spark igniter produces the spark that lights the surface burner. The main reason to replace the igniter is if the wires shorts out, or the porcelain has cracked, and it will no longer produce a spark. If your gas ...

This igniter and orifice assembly is a legitimate OEM replacement part for your gas stove, and includes the igniter, orifice assembly, and gas tube. This part may need replacing if the igniter fails or the tube is leaking gas. It is a very easy repair. Remove the grates and burners from the range. Unscrew the existing assemblies and pry off the cooktop. Locate the assembly you are replacing and un...