Frigidaire Range Igniters

This flat style gas oven igniter has an amperage range between 3.2 to 3.6. This part comes with two ceramic wire nuts.

This part has a long wire harness. This part ignites the gas to light the oven burner. The wire length is approximately 14 inches long.

Get your oven heating properly again with this igniter, designed to light the gas burner and start the cooking process. It delivers reliable ignition to ensure consistent oven performance and proper temperature control. Built for dependable use, this component is an ideal replacement when your oven is not heating as it should, helping restore safe and efficient operation.

This gas oven bake igniter is designed to initiate the heating process by activating the burner during baking cycles. It functions by heating up until it reaches the ignition point, allowing gas to ignite and maintain consistent oven temperatures. A failing igniter is a common cause of heating issues, including longer preheat times, uneven baking, or complete failure to heat. Replacing the igniter...

This genuine OEM oven broil igniter kit is designed to reliably ignite the gas burner, restoring proper heating performance to your appliance. Featuring a durable flat ceramic construction with an integrated half-shield, it helps protect the igniter while ensuring consistent ignition. The included 18-inch wire leads provide flexibility for installation, making it a convenient replacement for a wor...

This igniter has a short wire harness. The wire length is approximately 6 inches long.

Use this igniter with sealed burners.

The function of the ignitor in your range is to create the spark that ignites the gas on the burners. If your spark ignition system is not functioning properly, you may need to replace the ignitor. This part is approximately 3 inches in length. The ignitor is located in the rear of the range, so you will need to remove the back panel in order to access it for this repair. Before beginning this rep...

This igniter and orifice assembly is a legitimate OEM replacement part for your gas stove, and includes the igniter, orifice assembly, and gas tube. This part may need replacing if the igniter fails or the tube is leaking gas. It is a very easy repair. Remove the grates and burners from the range. Unscrew the existing assemblies and pry off the cooktop. Locate the assembly you are replacing and un...

This range surface burner igniter and orifice holder assembly is designed for use on a gas range and is commonly positioned at the right-front burner, often the high-output cooking zone. The assembly combines the igniter electrode and gas orifice to regulate fuel flow and generate a spark, producing a strong, consistent flame rated at 17,000 BTUs for reliable high-heat cooking. Constructed from he...

This surface burner igniter and orifice holder assembly controls gas flow and provides the spark needed to light the burner. Designed for consistent flame performance, it supports reliable ignition and efficient cooking. Replacing a worn or clogged unit can resolve ignition issues, uneven flames, or burners that won’t stay lit.

This flat style gas oven igniter is 5.53 inches long and comes with a bracket and wire nuts. Its amperage range is between 3.2 and 3.6 amps. May be different in appearance but will function as the orginal part.

This flat style gas oven igniter comes with a bracket and wires. Its amperage range is between 3.2 and 3.6 amps.

The broil igniter ignites the gas to light the oven broil burner.

Also known as spark electrode. This part helps your burner ignite and produce flame.

This genuine assembly combines the orifice holder, which directs gas flow to the burner head, and the igniter electrode, which generates the spark to ignite the gas. Designed for reliable lighting and consistent burner performance, it is the recommended replacement for issues such as no ignition, intermittent lighting, or delayed ignition at a single burner. Installation is straightforward, restor...