Frigidaire Range Elements and Burners

The terminals on the element are male quarter inch spade connectors. This part is found on the bottom of the oven. Approximate size is 19 1/4 inch W X 17 3/4 inch D.

This coil element has looped terminal ends.

Dual Radiant Surface Element

This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to ...

This bake element is found on the bottom of the oven.

This bake element is found on the bottom of the oven.

Sold individually. This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if the coil has shorted out or the terminal block shorted, and this caused the connectors at the end to burn out. The element is set in place by springs. You will need to push the spr...

This 3400-watt bake element has screw style connections. The bake element is located on the bottom of the oven cavity and supplies the heat for baking. If your oven is not heating evenly, element will not heat, or there is little to no heat when baking, you may need to replace the element. When replacing the element make sure to hold the wires forward so the wires do not fall back through the rear...

This lower oven bake element is designed to provide the primary heat source for baking and roasting, delivering consistent, even temperatures throughout the oven cavity. Built with a multi-loop design for efficient heat distribution, it operates on standard high voltage to support reliable cooking performance. Replacement is recommended if the oven fails to heat properly, cooks unevenly, or if the...

This heating element is a partially open-style bake element. Carrying 240V and 2000W, it is 19-1/4" wide by 15" long. The two 90-degree push-on male spade terminals are 13-3/4" apart.

This bake element is found on the bottom of the oven.

Restore full broiling performance with this broil element, designed to provide high-intensity heat from the top of the oven cavity. It ensures even heat distribution for consistent cooking results, making it ideal for broiling and browning foods. Built for reliable operation, this component helps address issues such as uneven heating or reduced broil temperatures, keeping your oven functioning properly.

This part is the heatsource. This surface element is for ranges. Surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

This dual radiant surface element is designed to deliver flexible heating for your electric range or cooktop, accommodating both small and large cookware with its two heat zones measuring 9 inches and 12 inches in diameter. Built for efficient performance, it provides powerful heat output—up to 3000 watts at 240 volts—ensuring quick and even cooking. Ideal for replacing a worn or damaged element, ...