Crosley Range Elements and Burners

The terminals on the element are male quarter inch spade connectors. This part is found on the bottom of the oven. Approximate size is 19 1/4 inch W X 17 3/4 inch D.

This coil element has looped terminal ends.

This bake element has push-on terminal ends. NOTE: This element has been updated by the manufacturer. New installation screws are required. Screws are sold separately.

Dual Radiant Surface Element

This element has looped terminal ends and comes with a black medallion center. This element is a genuine OEM replacement part, has looped terminal ends, comes with a black medallion center, and fits most electric ranges. All burners are made of a heating wire that produces heat from electricity. Remove the non-functional burner element from the terminal block (or receptacle). Use a multi-meter to ...

This bake element is found on the bottom of the oven.

Sold individually. This part is sold individually. This is a part for your stove top. The surface element is what your cookware sits on. The element supplies heat at varying temperatures. This may need to be replaced if the coil has shorted out or the terminal block shorted, and this caused the connectors at the end to burn out. The element is set in place by springs. You will need to push the spr...

NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

This 3400-watt bake element has screw style connections. The bake element is located on the bottom of the oven cavity and supplies the heat for baking. If your oven is not heating evenly, element will not heat, or there is little to no heat when baking, you may need to replace the element. When replacing the element make sure to hold the wires forward so the wires do not fall back through the rear...

The manufacturer suggests replacing the receptacle at the same time.

This lower oven bake element is designed to provide the primary heat source for baking and roasting, delivering consistent, even temperatures throughout the oven cavity. Built with a multi-loop design for efficient heat distribution, it operates on standard high voltage to support reliable cooking performance. Replacement is recommended if the oven fails to heat properly, cooks unevenly, or if the...

Restore full broiling performance with this broil element, designed to provide high-intensity heat from the top of the oven cavity. It ensures even heat distribution for consistent cooking results, making it ideal for broiling and browning foods. Built for reliable operation, this component helps address issues such as uneven heating or reduced broil temperatures, keeping your oven functioning properly.

This part is the heatsource. This surface element is for ranges. Surface element supplies the heat to a cooking area on top of the range. Unplug the range or shut off the house circuit breaker for the range before installing this part. Wear work gloves to protect your hands.

This element has looped terminal ends and 5-turns. This element features pigtail, looped ends. This element is 8" in diameter. This element is 2100 watts. This element coil has 5 turns. This surface element has a black centre medallion. The coil surface element supplies the heat to a cooking area on top of the range.

This oven bake element with push-on terminals has a terminal depth of three inches, making a total element length of nineteen inches.