Kenmore Freezer Switches

Door switch turns the light off when you close the door.

This door switch is used in refrigerators. It is activated by the closing and opening of the door

This part turns the light on/off as the door opens and closes.

This is a switch for your refrigerator, but you may also know it as a door switch or a plunger light switch. This part turns your appliance light on and off as the door is opened and closed. If your current light does not turn on, it will need to be replaced. To make this repair you will need a Phillips head screwdriver, a putty knife, and a flat head screwdriver.

This part turns the light on/off as the door opens and closes.

Compressor start relay kit is an original equipment manufacturer (OEM) part that fits some Kenmore, Frigidaire, Electrolux, Crosley, Gibson and White-Westinghouse refrigerators. It also fits some Kenmore, Frigidaire and Gibson upright freezers. Compressor start relay kit includes the compressor start relay, run capacitor, wire harness adapter, 2 wire terminals, 2 wire connectors, 2 pieces of wi...

This is a genuine replacement switch. It is a push button style switch that is designed for use in your refrigerator. When the door of your appliance is opened the switch is released, and the light comes on. When you close the door the switch is pressed in, and the light turns off. You may need a putty knife to remove your old switch.

This part is the replacement push switch for your refrigerator. It is made of white plastic and is sold individually. The door switch turns the light on and off when you open the door, and it is also a safety mechanism that doesn’t allow the auger motor to come on and dispense ice when the door is open. To remove the switch, simply pry it out of position with a small flat head screwdriver, then di...

This part aids in the dispensing of ice or water.

Overload is sold separately. The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.