Kenmore Freezer Compressors

The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed. Note: This part has been updated by the manufacturer. It may differ in appearance but will still function the same as the original.

This start device is essential for initiating the compressor in your refrigerator, ensuring efficient cooling performance. Built with high-quality components for dependable operation, it helps maintain consistent temperature control and energy efficiency.

The evaporator is always located on the inside of the refrigerator, usually inside the freezer compartment. It also resembles a radiator.

This start relay helps initiate compressor operation by providing a temporary boost of power. Proper relay function ensures reliable cooling performance. Replacing a faulty relay can resolve start-up or cooling issues.

This heat exchanger, also known as a suction or capillary tube, is an essential component of your refrigerator or freezer’s sealed system. It transfers heat from inside the appliance to the outside environment, helping maintain a consistent temperature for optimal food preservation. By carrying refrigerant between the condenser and evaporator, it ensures efficient cooling performance. A properly f...

NOTE: This part has been replaced by the manufacturer. It may look different from the original but will still function the same. This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

Compressor start relay kit is an original equipment manufacturer (OEM) part that fits some Kenmore, Frigidaire, Electrolux, Crosley, Gibson and White-Westinghouse refrigerators. It also fits some Kenmore, Frigidaire and Gibson upright freezers. Compressor start relay kit includes the compressor start relay, run capacitor, wire harness adapter, 2 wire terminals, 2 wire connectors, 2 pieces of wi...

This compressor start relay is a replacement electrical component that helps start and protect the compressor during operation. It is commonly replaced when cooling systems fail to start, click repeatedly, or shut down shortly after startup. Proper fitment should be verified prior to installation.

Also known as the start device/relay. This part briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.

This thermistor assembly monitors temperature changes and provides accurate feedback to the control system. Designed for precision, it supports proper regulation and efficient operation.

Start relay and overload for production compressor only. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed. The overlay provides added protection against excessive current and against excessive temperature use.

This is the mechanics (motor/engine) of the cooling system. It kicks in whenever the thermostat demands cooling. ***NOTE: This part needs to be installed by a trained professional in appliance repair. It requires special tools and knowledge to do so.

The compressor overload protector attaches to the compressor and shuts off the compressor if the compressor motor draws too much current.

This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

It is an electronic pump that is mounted at the back of the fridge. The compressor contains refrigerant gases that assist in the cooling process and sits next to the condenser. Hot air from the compressor circulates to the condenser where it cools down quickly into a liquid.