General Electric Freezer Compressors

These compressor electrical components are replacement parts that support electrical startup and continuous operation of the compressor system. They play a key role in maintaining stable operation and are commonly replaced when electrical faults prevent normal cycling or startup.

This part is the replacement compressor start relay for your refrigerator. It is made of black plastic and is approximately 1 ¼ inches long and 1 inch wide. The compressor start relay attaches to the compressor and helps to start the compressor motor. If the compressor will not start, or if your refrigerator or freezer is too warm, you may need to replace the compressor start relay. This part is s...

This is the mechanics (motor/engine) of the cooling system. It kicks in whenever the thermostat demands cooling. ***NOTE: This part needs to be installed by a trained professional in appliance repair. It requires special tools and knowledge to do so.

This part is both the start relay and the overload. The start relay boosts the compressor, and then shuts off as soon as the motor gets up to speed and the overload provides extra protection against excessive temperatures.

Also known as the Start Relay. The start relay briefly boosts the compressor, and then shuts off as soon as the motor gets up to speed.

Keep your refrigerator or freezer running efficiently with this complete compressor kit. The compressor serves as the heart of the cooling system, pressurizing and circulating refrigerant through the evaporator and condenser coils to maintain consistent internal temperatures. This kit includes all essential components for installation, such as the compressor, start relay, capacitor, filter drier, ...

This refrigerator and freezer compressor kit circulates refrigerant through the cooling system to maintain consistent, proper temperatures for food and beverages. Designed to restore cooling performance, it is commonly used to address issues such as poor cooling, unusual noises, or continuous operation.