Maytag Dryer Elements and Burners

This heating element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current, causing the wire to heat up. The heat produced is used to dry the clothes in your dryer.

The dryer heating element generates the heat required for drying clothes and fits a wide range of electric dryers from various brands, including Kenmore and Roper. Operating at 5400 watts and 240 volts, it features a durable nickel-chrome wire housed in a sturdy metal frame. Installation requires basic tools and electrical safety precautions. Check the thermal fuse and clear the vents before repla...

This kit is used for electric clothes dryers, and it comes with a yellow wire nut.

NOTE: The manufacturer recommends that you replace the burner receptacle at the same time.

The manufacturer suggests replacing the receptacle at the same time.

Made for use with series 08 and later gas and electric clothes dryers, this pre-stretched heating element coil carries 240 volts.

This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer.

This orange dot heating element replaces those elements with an orange dot on the element flange. It carries 240 volts.

This heating element consists of a one piece metal tube and a coil. It carries 240 volts and is almost fifteen inches long with an approximate seven inch diameter. This element includes thermal fuse and heat shield.

This part is used with compact dryers and included both thermostats.

This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer.

This heating element consists of two pieces: a metal tube and a coil. It carries 240 volts and is approximately 17 inches long with an approximate 7 inch diameter.

This element is strung with a coiled wire made of a nickel and a chrome alloy. This wire receives, but resists, a controlled electric current and as a result, the wire heats up. The heat produced is used to dry the clothes in your dryer.

This dryer heating element assembly generates the heat needed for proper drying performance and consistent temperature control. The assembly includes the heating coil housed within a durable metal frame, allowing for reliable heat distribution during operation. Replacing a faulty heating element can resolve issues such as no heat, insufficient heat, or clothes taking too long to dry. This componen...