Whirlpool Dishwasher Caps and Lids

The rinse aid cap (sometimes referred to as the dispenser cap), covers the rinse aid dispenser on the dishwasher door. If your dishwasher will not dispense detergent, or it is leaking detergent, there could be an issue with the rinse aid cap. Check the cap and its gasket for any damage or melting. If the cap has melted or it is not sealing the dispenser properly, the part should be replaced right ...

This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.

This part holds the rinse aid liquid in the dispenser until the timer activates the rinse cycle.

This cap does not require the use of a o-ring seal.

This is a replacement cap for the detergent/rinse aid dispenser. If the rinse aid cap is damaged or missing, you may notice too much rinse aid in the dishwasher. The cap simply screws in to the dispenser, so if your cap is damaged you can simply screw it out, then screw in the new one. The rinse aid cap is approximately 2 inches in diameter and is sold individually. This is an OEM part, directly f...

The plastic button covers the sharp ends of screws along the edge of the dishwasher tub. Sold individually.