Maytag Dishwasher Wheels and Rollers

Sold individually. Each roller holds two wheels. There are four sets that attached to the lower rack.

This dishrack adjuster and wheel assembly is for dishwashers and lets you adjust the dishrack height and attaches the track wheels to the dishrack.

Sold Individually.

Sold Individually.

This part attaches to the lower dishrack.

This upper dishrack roller assembly allows you to smoothly slide the dishrack in and out of your dishwasher. If your dishrack is difficult to move, replacing the roller assembly may be necessary. Always unplug the dishwasher before installation, and wear gloves for safety. Refer to the parts diagram for more details on the components included.

This part is the wheel and the axle or clip that holds it on the dish rack. It is sold individually.

Sold Individually - 4 required on rack.

This lower dishrack roller is less than two inches in diameter. It is made entirely of plastic.

This is a tub wheel assembly for your dishwasher. This assembly, complete with two rollers on a supporting bracket, supports the rack along the upper rail or track to allow the rack to slide smoothly. You may need to replace this if the rollers are broken or jammed. The part is gray in color and is made of plastic. You will need to remove your upper rack to install this replacement tub wheel assembly.

When you order this part it is recommended that you order the gaskets as well - search by model#.

This upper dishwasher dishrack roller is just over an inch in diameter. It is all white in color and is made entirely of plastic.

This wheel supports smooth movement of drawers or components within the appliance. Designed to reduce friction and maintain alignment, it is replaced when parts bind, drag, or roll unevenly.

The dishrack roller attaches to the dishrack and allows you to roll the dishrack in and out.

Sold individually.

This dishwasher caster wheel is four inches long. It is a two inch black wheel with a white shaft. This wheel is used with portable dishwashers.

This white mounting strip wheel is a little over an inch in diameter.

This part is a replacement wheel assembly, or upper rack roller for your dishwasher. The wheel itself is made of white plastic and is approximately 1-1/2 inches in diameter. The wheel is connected to a gray plastic bracket that attaches the wheel to the rack. The bracket is approximately 7-1/2 inches by 1 inch in size. The wheels on the dishrack allow it to roll in and out of the dishwasher effici...