Kenmore Dishwasher Spray Arms

The lower spray arm sprays water while it rotates inside the dishwasher during cycles. Note: Lower spray support should be ordered if your replacing the lower spray arm.

Keep your dishes thoroughly clean with this lower spray arm assembly, designed to distribute water and detergent evenly throughout the dishwasher. Its rotating design sprays water in multiple directions to ensure effective cleaning of all items in the rack. Easy to install with a simple snap-in fit, this durable component helps restore proper wash performance and is an ideal replacement for a worn...

This is a lower spray arm for a dishwasher. The lower spray arm allows water to be spread evenly throughout the dishwasher tub with the proper force so dishes come out clean. This spray arm is gray in color and is about 20 inches long. You may need to replace this part if the water is not being distributed.

This kit has been redesigned. The supply tube is now one piece. This spray arm kit comes with an upper spray arm, holder, water supply tube, and a screw. This kit does NOT include the upper support or mount.

Enhance the efficiency of your Whirlpool dishwasher with this top-quality spray arm. This essential part rotates and sprays water effectively to clean the dishes inside the dishwasher tub, providing a thorough and comprehensive cleaning. Durably constructed, it stands up to regular use and ensures a lasting performance. Keep in mind, it's advised to wear work gloves in order to protect your hands ...

**Please note: This mount has been redesigned by the manufacturer for efficiency. The top mounting clip and screw are no longer needed.

This part is used with the lower spray arm.

The upper spray arm helps distribute water from the top of the dishwasher tub.This spray arm is a genuine OEM replacement part for your dishwasher. This spray arm is for the upper part of your dishwasher. No tools are required for this repair, simple remove the rack stops and upper dish rack, then disassemble the mount and spray arm before installing the new one.

This white under spray arm bearing ring is designed with the split. This is not a defective or damaged item.

This genuine OEM dishwasher spray arm assembly is designed to deliver powerful, even water distribution throughout the wash cycle, helping ensure dishes come out thoroughly clean. Located in the middle of the tub, it rotates to spray pressurized water and detergent to effectively remove food debris and grease. Made from durable materials for long-lasting performance, this component is an ideal sol...

This is also called the 3rd-level spinner. This part works like a little spray arm at the top of your dishwasher.

This plastic cover and stem assembly helps hold the lower spray arm in place.

The upper spray arm rotates and sprays water to clean the dishes inside the dishwasher tub. If your dishes are not being cleaned properly, you should check if there is an issue with the spray arm. To check your spray arm, make sure the spray arms can move evenly and freely on their bearing rings and mounting brackets. Remove your spray arm and check to ensure they are straight and undamaged. This ...

This seal is located between the spray arm and the water feed tube.

Also known as a wash arm seal.

The spray arm manifold holds the spray arm and connects the spray arm to the water feed tube.

This part is the top spinner located at the very top of the wash tub. Water passes through all the spinners causing it to dispense all around the tub.