Hotpoint Dishwasher Pumps

The circulation pump adapter, or pump adapter assembly connects the circulation pump to the tub of your dishwasher. If your dishwasher is leaking around this adapter, check the connection to ensure everything is fitted tightly. If there is a problem with the adapter, make sure to disconnect the water supply to your dishwasher before completing the repair.

The pump ejects the water from the unit.

This works in conjunction with the pump and filtration system. It is used to filter the drainage for disposal.

Please keep in mind this housing is for single drain outlet models only. This part will not work for dual outlet port models.

This part is the replacement adaptor pump assembly, also known as the check valve and hose assembly for your dishwasher. It is made of white and brown plastic, and is approximately 4 ½ inches long, 1 ¼ inches wide and the opening at the top is about an inch in diameter. The adaptor pump assembly connects the sump and the drain pump, and prevents dirty water from getting back in. If it cracks, it c...

This works in conjunction with the pump and filtration system. It is used to receive drainage for disposal.

This part is the replacement sump housing or sump insert for your dishwasher. It is made of plastic and is approximately 7 inches by 5 inches. The sump housing is attached to the bottom of the dishwasher tub and collects water for the pump. If your dishwasher is leaking, you may need to replace the sump housing. Be sure to disconnect the dishwasher from the water and power source before you begin ...

This part will drain water from the appliance in different cycles.

CAP SUMP