General Electric Dishwasher Valves

This is a washer inlet valve assembly for your dishwasher. This valve allows water to flow into your dishwasher at the proper rate. If your dishwasher tub is not filling with water or filling when the appliance is not in use, you may need to replace the inlet valve. It measures approximately 3 inches by 4 inches and is made of metal and white plastic.

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoid on the valve open and close according to the desired amount of water needed.

This inlet valve regulates water entering the dishwasher for proper wash and rinse cycles. A worn valve can cause filling issues or leaks. Compatible with GE and Hotpoint models, it installs quickly after disconnecting power and water supply.

This water inlet valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed. This valve has a 3/8" inlet and comes with the mounting bracket.

This water inlet valve assembly is a critical component that regulates water flow into the dishwasher, ensuring proper filling for an effective wash cycle while preventing leaks. Replacing a faulty valve can resolve issues such as inconsistent water levels, leaks, or incomplete cycles. Built for durability and reliability, this part helps maintain optimal cleaning performance. Installation is DIY-...

This is used for the check valve.

This water inlet valve is specially designed for those dishwashers that fit under the counter from 1974 To Present. The valve should be located behind the lower kickplate panel in either the right or left corner. The attaching solenoids on the valve open and close according to the desired amount of water needed.