This switch is an original Milwaukee replacement part manufactured for use with angle grinders. This internal switch relays power from the cord to the motor. The switch is actuated by the external slide switch wich is connected to slide pole that makes contact with this internal switch. This switch is available as an individual replacement part, please see model diagram for additional parts.
Removed rear housing from the grinder, then the cord clamp. I made a wiring diagram of the wires. Then I disconnected the wires from the old switch and connected them to the new switch. I attached the cord clamp and the rear housing. Plugged it in to test it. And it worked great.
Removed case
Tested switch-failed
Order new parts to include new brushes since they were easy to access
Replaced new parts
Put the grinder back to work
Did you find this story helpful?
Thank you for voting!
Replaced the 110v cord and switch. Bad cord, loose switch
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
_WW_1.gif "Part Location Diagram of 23-66-0385 Milwaukee Switch")
_WW_1.gif "Part Location Diagram of 23-66-0385 Milwaukee Switch")
