Part Location Diagram of 343373650 Metabo Switch Slide
See part 25 in the diagram
( Grid squares measure 1x1 inch )

Switch Slide 343373650

Manufactured by:
Metabo
ERP Number:
ERP10418350
Part Number:
343373650
Original Equipment Manufacturer ?
  Works with your model  W10-125QUICK!
$6.16
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(2 rated repairs) ?
  Works with your model   W10-125QUICK!

Product Description

?

This replacement slider switch knob is a genuine metabo part. It is supplied directly from manufacturer for use with grinders/polishers. It is the slider knob for the main on/off switch of a tool. This slider is made out of black plastic and it is sold individually. Replacing this switch slider should only require a screwdriver. • Make sure the tool is unplugged • Remove the housing screws • Remove the slider and secure the new one in place • Reassemble and test the unit

Troubleshooting

This part works with the following brands:
  • Metabo
This part works with the following products:
  • Angle Grinder
Part# 343373650 replaces these:
343373650,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

start button would not stay locked on.

mark from TRUMANSBURG, New York

1 person found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Pliers, Screw drivers
Parts Used:
343406740, 343391880, 343373650
purchased four parts needed for repair. disassembled, replaced and reassembled. armature brushes were also replaced.
Did you find this story helpful?
Thank you for voting!

Right angle grinder switch would not stay on.

John from New Cumberland, West Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
343373650, 343373640
Replaced the 2 parts, switch slide and switch rod. Only required a Phillips screw driver and less than 30 minutes time. Works good as new. Thank you for your quick and easy ordering service.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10418350
Manufacturer Part Number: 343373650
Brand Model Number Description
Metabo G500 Angle Grinder - 500W Die Grinder
Metabo GE700 Angle Grinder - 710W Die Grinder
Metabo GE900Plus Angle Grinder - 900W Die Grinder
Metabo LF724S Router - Paint Remover
Metabo PE12-175 Sander Polisher - Polisher
Metabo SE12-115 Sander Polisher - 1200 W Burnishing Machine
Metabo STE105PLUS Jig Saw - 710W Orbital Jig Saw
Metabo STE135PLUS Jig Saw - 720W Orbital Jig Saw
Metabo W10-125Quick Angle Grinder - 1010W Angle Grinder
Metabo W10-150Quick Angle Grinder - 1010W Angle Grinder
Metabo W7-115 Angle Grinder - 750W Angle Grinder
Metabo W7-115Quick Angle Grinder - 750W Angle Grinder
Metabo W7-125 Angle Grinder - 750W Angle Grinder
Metabo W7-125Quick Angle Grinder - 750W Angle Grinder
Metabo WE14-125Plus Angle Grinder - 1400W Angle Grinder
Metabo WE14-125VS Angle Grinder - 1400W Angle Grinder
Metabo WE14-150Plus Angle Grinder - 1400W Angle Grinder
Metabo WE14-150Quick Angle Grinder - 1400W Angle Grinder
Metabo WE9-125Quick Angle Grinder - 950W Angle Grinder