Part Location Diagram of 343373640 Metabo Switch Rod
See part 26 in the diagram
( Grid squares measure 1x1 inch )

Switch Rod 343373640

Manufactured by:
Metabo
ERP Number:
ERP10418349
Part Number:
343373640
Original Equipment Manufacturer ?
  Works with your model  GE700BASIC!
$6.16
Special Order

Easy 

15 - 30 mins 

(1 rated repair) ?
  Works with your model   GE700BASIC!

Product Description

?

This is an authentic Metabo replacement part that has been sourced from the original manufacturer to be used with angle grinders, orbital jigsaws, and paint removers. The rod fits into the tool's main casing and is used to connect the power button and the switch assembly. The rod actuates the switch when the button is slid to the on/off position. This item is available as an individual replacement part.

Troubleshooting

This part works with the following brands:
  • Metabo
  • Metabo HPT
This part works with the following products:
  • Angle Grinder
Part# 343373640 replaces these:
343373640,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

15 - 30 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Right angle grinder switch would not stay on.

John from New Cumberland, West Virginia

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
343373650, 343373640
Replaced the 2 parts, switch slide and switch rod. Only required a Phillips screw driver and less than 30 minutes time. Works good as new. Thank you for your quick and easy ordering service.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10418349
Manufacturer Part Number: 343373640
Brand Model Number Description
Metabo HPT BFE9-90 Belt or Drum Sander - Gb 110v
Metabo G500 Angle Grinder - 500W Die Grinder
Metabo GE700 Angle Grinder - 710W Die Grinder
Metabo HPT GE700BASIC Sander Grinder - Sa 220v / 60hz
Metabo GE900Plus Angle Grinder - 900W Die Grinder
Metabo LF724S Router - Paint Remover
Metabo STE105PLUS Jig Saw - 710W Orbital Jig Saw
Metabo STE135PLUS Jig Saw - 720W Orbital Jig Saw
Metabo W7-115 Angle Grinder - 750W Angle Grinder
Metabo W7-115Quick Angle Grinder - 750W Angle Grinder
Metabo W7-125 Angle Grinder - 750W Angle Grinder
Metabo W7-125Quick Angle Grinder - 750W Angle Grinder
Metabo WE9-125Quick Angle Grinder - 950W Angle Grinder