Close
Phone 1-855-343-0069
Cart
Official OEM Guarantee
Fast shipping from USA
365 Day Returns
Preferred Brand Partners
10416101-1-M-Metabo-316028700-Brush And Holder
Part Location Diagram of 316028700 Metabo Brush And Holder
See part 28 in the diagram
10416101-1-S-Metabo-316028700-Brush And Holder 360 view
( Grid squares measure 1x1 inch )
10416101-1-S-Metabo-316028700-Brush And Holder 10416101-2-S-Metabo-316028700-Brush And Holder 10416101-3-S-Metabo-316028700-Brush And Holder 10416101-1-S-Metabo-316028700-Brush And Holder 360 view
Part Location Diagram of 316028700 Metabo Brush And Holder

Brush And Holder 316028700

Manufactured by:
Metabo
ERP Number:
ERP10416101
Part Number:
316028700
Original Equipment Manufacturer ?
  Works with your model  W7-115QUICK!
$23.68
In Stock
Delivers in 3-5 Business Days!

Easy 

Less than 15 mins 

(2 rated repairs) ?
  Works with your model   W7-115QUICK!

Jump to:

Description Troubleshooting Questions & Answers Repair Instructions Model Cross Reference

Product Description

?

This item is a genuine Metabo replacement part that has been OEM sourced and is intended to be used with angle grinders. The carbon brush is used to relay electricity from the switch to the motor assembly. The brush is pressed against the commutator bars while the armature is spinning and this can cause the brush to wear down over time and will need to be replaced. This item is a complete part assembly that includes the brush holder, spring, and one brush. This item is sold as an individual replacement part.

Troubleshooting

This part works with the following brands:
  • Metabo
  • Metabo HPT
This part works with the following products:
  • Angle Grinder
  • Jig Saw
  • Belt or Drum Sander
Part# 316028700 replaces these:
316028700,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(2 rated repairs) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

A small connector tab broke away from the brush holder in my Metabo die grinder.

John from Lincoln, Nebraska

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Pliers, Screw drivers
Parts Used:
316028700
1. Removed the screws from the cord end of the grinder, and the access cover (effectively splitting the control end of the grinder in half) to expose the brush set.
2. Pulled wire connectors from the old brush set.
3. Used a small needle nose pliers and a small screwdriver to gently pry the brush set from its mounting clip.
4. Replaced the brush set (provided by E-replacement Parts with a new brush) into the mounting clip and use the needlenose pliers to move the spiral spring from the side of the brush (which was holding it in place for installation) to the top of the brush, to push it against the armature.
5. Replace wire connectors.
6. Replace the brush access cover, and tighten the screws.
Read less
Did you find this story helpful?
Thank you for voting!

Worn brushes

Frank from Gustine, California

1 person found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
15 - 30 mins
Tools:
Screw drivers
Parts Used:
316028700
Remove the back cover of the grinder, disconnect the leads from the brush and holder assemblies. The remove them. Install the new brush and holder. And pull the springs around so they are behind the brushes. Install the back cover, and your done.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10416101
Manufacturer Part Number: 316028700
Brand Model Number Description
Metabo HPT BFE9-90 Belt or Drum Sander - Us 120v
Metabo G500 Angle Grinder - 500W Die Grinder
Metabo GE700 Angle Grinder - 710W Die Grinder
Metabo GE900Plus Angle Grinder - 900W Die Grinder
Metabo HPT KNSE12-150 Belt or Drum Sander - Us 120v
Metabo LF724S Router - Paint Remover
Metabo HPT MFE30 Miscellaneous - Gb 110v
Metabo PE12-175 Sander Polisher - Polisher
Metabo RBE12-180 Belt or Drum Sander - Gb 110v
Metabo SE12-115 Sander Polisher - 1200 W Burnishing Machine
Metabo STE105PLUS Jig Saw - 710W Orbital Jig Saw
Metabo STE135PLUS Jig Saw - 720W Orbital Jig Saw
Metabo STEB105 Jig Saw - 710W Orbital Jig Saw
Metabo STEB105PLUS Jig Saw - 710W Orbital Jig Saw
Metabo STEB135 Jig Saw - 720W Orbital Jig Saw
Metabo HPT STEB135PLUS Jig Saw - Us 120v
Metabo W10-125Quick Angle Grinder - 1010W Angle Grinder
Metabo W10-150Quick Angle Grinder - 1010W Angle Grinder
Metabo W7-115 Angle Grinder - 750W Angle Grinder
Metabo W7-115Quick Angle Grinder - 750W Angle Grinder
Metabo W7-125 Angle Grinder - 750W Angle Grinder
Metabo W7-125Quick Angle Grinder - 750W Angle Grinder
Metabo WE14-125Plus Angle Grinder - 1400W Angle Grinder
Metabo WE14-125VS Angle Grinder - 1400W Angle Grinder
Metabo WE14-150Plus Angle Grinder - 1400W Angle Grinder
Metabo WE14-150Quick Angle Grinder - 1400W Angle Grinder
Metabo WE9-125Quick Angle Grinder - 950W Angle Grinder
Metabo WEP14-125Quick Angle Grinder - 1400W Angle Grinder
Metabo WEP14-150Quick Angle Grinder - 1400W Angle Grinder
Metabo WP7-115Quick Angle Grinder - 900 W Angle Grinder
Brush And Holder
$ 23.68
In Stock
✖
Stock Status
✖
Mail-In Recycling Rebate

Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.

✖