Part Location Diagram of 611737-01 DeWALT Switch Link
See part 162 in the diagram
( Grid squares measure 1x1 inch )

Switch Link 611737-01

Manufactured by:
DeWALT
ERP Number:
ERP10181435
Part Number:
611737-01
Original Equipment Manufacturer ?
  Works with your model  D28090-AR!
$5.95
Special Order
Minimum Quantity of 2 required

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   D28090-AR!

Product Description

?

This is an authentic replacement part that has been sourced from the original manufacturer. The plastic link rod is used with DeWalt and Black and Decker angle grinders. The link fits on the inside of the field case and is used to connect the switch button at the front of the grinder and the switch at the rear of the grinder. A screwdriver, pliers, and a pick are recommended for this repair.

Troubleshooting

This part works with the following brands:
  • DeWALT
  • Black and Decker
  • DeVilbiss
  • Craftsman
This part works with the following products:
  • Angle Grinder
  • Grinder
Part# 611737-01 replaces these:
611737-01,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

A Bit Difficult 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

on-off slide switch woul not stay latched, had to be held on at all times

PETER from LYONS, New York

2 of 2 people found this instruction helpful.
Difficulty Level:
A Bit Difficult
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
Remove grinder gear head, 4 screws.Remove rear housing 1 screw. disconnect brushes. Pull out rotor and attached fan,diffuser, and bearing. Pull leads out of stator and caps to remove 2 screws. Unplug switch leads, remove switch and switch support, power cord all together. Push stator assembly forward out of housing far enough to get link and button out of housing. Put new link in slot and snap button in end of link through housing opening. Push stator to the rear back onto the housing. Assemble everything back in reverse. Note; When putting rotor in housing make sure the little tabs on fan diffuser are lined up.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP10181435
Manufacturer Part Number: 611737-01
Brand Model Number Description
Black and Decker 26436 Angle Grinder - 4-1/2 Small Angle Grinder
DeWALT 26742 Angle Grinder - Angle Grinder
Black and Decker 27326 Angle Grinder - 4-1/2 Small Angle Grinder
Black and Decker 27703 Angle Grinder - 4-1/2 Right Angle Grinder
Black and Decker 27742 Angle Grinder - 4-1/2 Right Angle Grinder
Black and Decker 27743 Angle Grinder - 4-1/2 Right Angle Grinder
Craftsman 900277031 Angle Grinder - Grinder
Craftsman 900277420 Angle Grinder - Grinder
Craftsman 900277421 Angle Grinder - Grinder
Craftsman 900277422 Angle Grinder - Grinder
Craftsman 900277431 Angle Grinder - Grinder
Black and Decker BWS22-QS Grinder - Oem Berner Sag
DeWALT D28090-AR Angle Grinder - 4-1/2" Small Angle Grinde
DeWALT D28090-B2 Grinder - 4-1/2 Small Angle Grinder
DeWALT D28090-B3 Grinder - 4-1/2 Small Angle Grinder
DeWALT D28090-BR Grinder - 4-1/2 Small Angle Grinder
DeWALT D28090AV-B2 Grinder - 4-1/2 Small Angle Grinder
DeWALT D28090AV-B3 Grinder - 4-1/2 Small Angle Grinder
DeWALT DW818 Angle Grinder - Angle Grinder
DeWALT DW818-AR Grinder - 4-1/2 Inch Grinder
DeWALT DW818-B2 Grinder - Slider Sag
DeWALT DW818-B3 Grinder - Slider Sag
DeWALT DW818-BR Grinder - 115mm Grinder
DeWALT DW821 Angle Grinder - Angle Grinder
DeWALT DWE4010-AR Grinder - 700w Small Angle Grinder
DeWALT DWE4010-B2 Grinder - 700w Small Angle Grinder
DeWALT DWE4010-B3 Grinder - 700w Small Angle Grinder
DeWALT DWE4010-BR Grinder - 700w Small Angle Grinder