Remove grinder gear head, 4 screws.Remove rear housing 1 screw. disconnect brushes. Pull out rotor and attached fan,diffuser, and bearing. Pull leads out of stator and caps to remove 2 screws. Unplug switch leads, remove switch and switch support, power cord all together. Push stator assembly forward out of housing far enough to get link
... Read moreand button out of housing. Put new link in slot and snap button in end of link through housing opening. Push stator to the rear back onto the housing. Assemble everything back in reverse. Note; When putting rotor in housing make sure the little tabs on fan diffuser are lined up.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP10181415
Manufacturer Part Number: 611540-00
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
