Part Location Diagram of 2600910001 Bosch Tool NEEDLE BUSHING
See part 26 in the diagram
( Grid squares measure 1x1 inch )

NEEDLE BUSHING 2600910001

Manufactured by:
Bosch Tool
ERP Number:
ERP19508193
Part Number:
2600910001
Original Equipment Manufacturer ?
  Works with your model  1757!
$5.95
In Stock
Delivers in 3-5 Business Days!

Easy 

30 - 60 mins 

(1 rated repair) ?
  Works with your model   1757!

Troubleshooting

This part works with the following brands:
  • Bosch
  • Skil
This part works with the following products:
  • Angle Grinder
  • Grinder
  • Belt or Drum Sander
  • Screwdriver
  • Drill
  • Planer Jointer
  • Sander Polisher
  • Sander Grinder
  • Electric Drill
  • Hammer Drill
Part# 2600910001 replaces these:
2600910001,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

Be the first to ask our experts a question about this part!

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

30 - 60 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

The Bosch 3\"-21\" belt sander wouldn\'t drive the belt under load. It would spin until the belt made contact with the work.

Roy from Middleton, Wisconsin

2 of 2 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
30 - 60 mins
Tools:
Screw drivers
The Bosch belt sander comes apart well with a slotted screwdriver. No bearing that I had replaced needed to be pulled with any special tools. They just slide off on their own. I had a worn ring gear which engages the gear on the end of the armature. Seems like the armature gear is much harder than the ring gear, which Bosch calls the \"CROWN GEAR\". Since it\'s seems softer, it is the one that wears out. The gear needs to be re-greased and that is only a little messy, and the brush set installs very easily. I did have to wait a while as Ereplacementparts ordered them from another supplier and had that supplier ship to them, then they repackaged and shipped to me. I believe that was why there was a bit of a wait. I didn\'t have immediate need for the Belt Sander so all was fine with the rather slow arrival of the repair parts. RH
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19508193
Manufacturer Part Number: 2600910001
Brand Model Number Description
Bosch 0300 Angle Grinder - Angle Grinder
Bosch 0600300039 Grinder - Angle Grinder
Bosch 0600301039 Grinder - Angle Grinder
Bosch 0600302039 Grinder - Angle Grinder
Bosch 0601121039 Electric Drill - Un. 2-Speed Drill
Bosch 0601121139 Drill
Bosch 0601188639 Drill
Bosch 0601188739 Drill
Bosch 0601189639 Drill
Bosch 0601189739 Drill
Bosch 0601274739 Belt or Drum Sander
Bosch 0601321439 Grinder - Angle Grinder
Bosch 0601322439 Grinder - Angle Grinder
Bosch 0601323439 Grinder - Angle Grinder
Bosch 0601328009 Grinder - Angle Grinder
Bosch 0601328039 Angle Grinder - Angle Grinder
Bosch 0601331439 Grinder - Angle Grinder
Bosch 0601332439 Grinder - Angle Grinder
Bosch 0601336039 Grinder - Angle Grinder
Bosch 0601337039 Grinder - Angle Grinder
Bosch 0601337139 Grinder - Angle Grinder
Bosch 0601338039 Grinder - Angle Grinder
Bosch 0601338139 Grinder - Angle Grinder
Bosch 0601339160 Grinder - Wet Grinder
Bosch 0601339460 Grinder - Wet Grinder
Bosch 0601359078 Angle Grinder - Angle Grinder
Bosch 0601367739 Chainsaw - Wall Chasing Machine
Bosch 0601412032 Screwdriver - Drill Screwdriver
Bosch 0601412034 Screwdriver - Drill Screwdriver
Bosch 0601412134 Screwdriver - Drill Screwdriver