1.Removed screws in sides holding switch.
2.Separate sides using flat bladed screwdriver.
2.Unplug switch from main housing.
3.Slide new grommet over new power cord.
3.Attach new power cord to new switch with
black and white wires in same position as
old using phillips screwdriver.
4.Attach
... Read moreswitch to plate in main housing.
5.Make sure grommet is inside housing, place
switch in one side, place other side over
switch and squeeze together, making sure
there are no gaps.
6.Replace screws in sides.
Read less
Did you find this story helpful?
Thank you for voting!
Broken on-off switch, would not turn grinder on or off
Remove rear handle of grinder, one end of switch unplugs. remove two screws on other end of old switch and replace leads on new switch, making sure all connections are tight. replace rear handle of grinder.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19501019
Manufacturer Part Number: 1607200103
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
