Took the end housing off the grinder. Took a photo of the wiring on the switch to be sure where to reattach the wires. I removed the wires and unscrewed the screws holding the switch down. Removed the switch and cut off the ends of the wires and stripped the insulation from the ends of the wires to expose good wire. Screwed the new switch
... Read more in place and reattached the wires. Screwed the housing back on the grinder and the job was done. The grinder works like new now.
Removed rear of unit which revealed the switch and brushes
Removed wiring from switch and applied a continuity test
Replaced switch and elected to replace the electrical cord as well. Used the soldering iron to stiffen the cord ends
Reinstalled the rear cover and tested.
Remove the screw from the end housing cover
Make a wiring diagram of the switch and where the internal parts are placed
Disconnect the wires from the switch.
Remove the old cord and slide it through the hole in the back cover, place the grommet on the cord. Connect the wires to the switch and hook up the internal parts.
... Read more Screw on the end housing cover
Had previously taken the grinder apart and tested the switch an found it was not working after 19 years of grinding fiberglass. Since the switch could not be taken apart and repaired, i replaced it with a new one purchased from your Company. Since the grinder was already apart, it took only 5 minuets to install the switch and put the casi
... Read moreng back on. It started up with no problems. Fantastic site. I will return for any parts I might be looking for.
Read less
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19501018
Manufacturer Part Number: 1607200086
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
