I checked the power cord and on/off switch for continuity and both were good
I removed the motor contact brushes and noticed that they were significantly worn down
I also noticed a small spring protruding from one of the contact brushes
The common fix note on the website stated that one of the most common fix for my pro
... Read moreblem was brush replacement.
Ordered the replacement brush set and installed easily.
Grinder works great
Note: I used the exploded parts diagram to figure out how to disassemble the tool
1. Removed cover with torx drive screw driver
2. Removed cable clamp
3. Removed screws on wire terminals
4. Trimmed and stripped wires to proper length
5. Crimped new terminals on wire ends (terminals not included with replacement cable)
6. Reconnected terminals
7. Attached cable clamp
8. Replac
... Read moreed 4 screws in cover
The hard part is positioning the screws in their proper location. Space is limited and hard to get screws started
Read less
Did you find this story helpful?
Thank you for voting!
Brush wore down to minimum size, spring button released to stop grinder.
Removed outer housing, used dental pick to pull brush spring up and set aside. Removed brush from holder and used needle nose pliers to disconnect brush. Reverse procedures to in install brushes and put housing together.
Did you find this story helpful?
Thank you for voting!
< Prev
1
Next >
Model Cross Reference
This part works with the following models:
ERP Number: ERP19498296
Manufacturer Part Number: 1600703031
This part is in stock in our warehouse and will ship out within 1 business day of the order being placed.
New stock is on the way! On order parts usually ship within 7 business days.
Item is not in stock and usually ships 10-15 business days from the time you place your order.
This item is no longer being made by the manufacturer, and cannot be added to your shopping cart.
✖
Mail-In Recycling Rebate
Some of the parts we sell are eligible for mail-in rebates since we can recycle them. We will display any applicable rebates in your shopping cart. To redeem your rebate, contact Customer Service after you have received your part.
