Part Location Diagram of 1600703023 Bosch Tool GROMMET
See part 6 in the diagram
( Grid squares measure 1x1 inch )

GROMMET 1600703023

Manufactured by:
Bosch Tool
ERP Number:
ERP19498294
Part Number:
1600703023
Original Equipment Manufacturer ?
  Works with your model  GSF100A!
$5.95
On Order

Easy 

Less than 15 mins 

(1 rated repair) ?
  Works with your model   GSF100A!

Troubleshooting

This part works with the following brands:
  • Bosch
This part works with the following products:
  • Angle Grinder
Part# 1600703023 replaces these:
1600703023,

Questions & Answers

?

Our customer Service team is at the ready daily to answer your part and product questions.

We're sorry, but our Q&A experts are temporarily unavailable.
Please check back later if you still haven't found the answer you need.

Ask our Team

We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.

Does this fit my product?

Customer Repair Instructions

All our customer repair instructions are solicited directly from other customers just like you who have purchased and replaced this exact part.

Easy 

Less than 15 mins 

(1 rated repair) ?
  • 1
Sort by:  
Sorry, we couldn't find any existing installation instruction that matched.

Blowing breaker when start.

Randy from Kilgore , Texas

0 of 1 people found this instruction helpful.
Difficulty Level:
Easy
Total Repair Time:
Less than 15 mins
Tools:
Screw drivers
1.Removed screws in sides holding switch.
2.Separate sides using flat bladed screwdriver.
2.Unplug switch from main housing.
3.Slide new grommet over new power cord.
3.Attach new power cord to new switch with
black and white wires in same position as
old using phillips screwdriver.
4.Attach switch to plate in main housing.
5.Make sure grommet is inside housing, place
switch in one side, place other side over
switch and squeeze together, making sure
there are no gaps.
6.Replace screws in sides.
Did you find this story helpful?
Thank you for voting!
  • 1

Model Cross Reference

This part works with the following models:
ERP Number: ERP19498294
Manufacturer Part Number: 1600703023
Brand Model Number Description
Bosch 0601367739 Chainsaw - Wall Chasing Machine
Bosch 1353 Angle Grinder - (060039) Angle Grinder
Bosch 1356G Angle Grinder - Angle Grinder
Bosch 1357 Angle Grinder - (060039) Angle Grinder
Bosch 1357G Angle Grinder - Angle Grinder
Bosch 1361G Angle Grinder - Angle Grinder
Bosch 1362 Angle Grinder - (060039) Angle Grinder
Bosch 1362G Angle Grinder - Angle Grinder
Bosch 1363 Angle Grinder - (060039) Angle Grinder
Bosch 1364 Chop Saw - (060039) Cut-Off Machine
Bosch 1364K Miscellaneous - 12" Abrasive Cutoff Machine Kit
Bosch 1365 Chop Saw - (060039) Cut-Off Machine
Bosch 1365K Chop Saw - 14" Abrasive Cutoff Kit
Bosch 1752 Angle Grinder - (060039) Grinder
Bosch 1752G Angle Grinder - Grinder
Bosch 1752G7 Angle Grinder - Grinder
Bosch 1754 Angle Grinder - (060039) Grinder
Bosch 1754G Angle Grinder - Grinder
Bosch 1757 Angle Grinder - (060039) Grinder
Bosch 1772-6 Angle Grinder - Angle Grinder
Bosch 1853-5 Angle Grinder - Grinder
Bosch 1853-5IM Angle Grinder - Angle Grinder
Bosch 1853-6 Angle Grinder - Grinder
Bosch 18535 Angle Grinder - Angle Grinder
Bosch 1873-6 Angle Grinder - Grinder
Bosch 1873-8 Angle Grinder - Grinder
Bosch 1873-8D Angle Grinder - Grinder
Bosch 1873-8F Angle Grinder - Grinder
Bosch 18738 Angle Grinder - Angle Grinder
Bosch 1893-6 Angle Grinder - Angle Grinder