Black and Decker Jig Saw Parts
We sell only genuine OEM Black and Decker ® parts.
Top Black and Decker Jig Saw Models
-
Black and Decker JS660 (Type 1) Jigsaw Jig Saw Parts
-
Black and Decker JS660 (Type 2) Jigsaw Jig Saw Parts
-
Black and Decker SC500 (Type 4) Hand Saw Jig Saw Parts
-
Black and Decker SC500 (Type 1) Hand Saw Jig Saw Parts
-
Black and Decker JS700 (Type 1) Jigsaw Jig Saw Parts
-
Black and Decker JS600 (Type 1) Jigsaw Jig Saw Parts
-
Black and Decker JS500 (Type 2) Variable Speed Jig Saw Parts
-
Black and Decker JS500 (Type 1) Variable Speed Jig Saw Parts
Popular Black and Decker Jig Saw Parts
- Manufacturer Part Number:
- 330005-01
- Manufacturer Part Number:
- 448557-98
This replacement 10 foot power cord is specially produced for Black and Decker and Dewalt power tools. It is designed to connect to a standard US outlet supplying power to the tool. Please note one rubber insulated cord is included per order, the cord protector is not included it is sold separately. To complete this repair you will need a screwdriver.
- Manufacturer Part Number:
- 445861-25
(Sold Individually)
This motor brush is for grinders.
The motor brush transfers electric current to the spinning armature in the motor.
Unplug the grinder before installing this part. Wear work gloves to protect your hands.
- Manufacturer Part Number:
- 605040-06
This is replacement ball bearing is a commonly used item on a variety of power tools. Bearings are specially designed to allow connected parts to rotate smoothly. The way it is build it will minimize friction between the rotating parts. This is a sealed metal bearing generally used with an armature. Includes one (1) bearing per order. Steps to replace this bearing would be different from one mode...
- Manufacturer Part Number:
- 870889-03
It is a genuine OEM sourced component which is specially produced for use with DeWALT and Black and Decker power tools. This petroleum based grease is used to lubricate the system allowing for easy low friction movement while protecting parts from the usual wear. Please note this high-quality item is sold individually.
- Manufacturer Part Number:
- 445860-00
This is a genuine OEM replacement part, it is sold individually. This part is used to keep the brush tight against the armature so the tool will work properly. Over time when the brushes wear down and heat is created, the spring may lose its tension and will have to be replaced.
- Manufacturer Part Number:
- 761819-00
This is an authentic replacement part manufactured for use with DeWalt, and Black and Decker power tools. Carbon brushes are considered a wear item because they are in constant contact with the spinning armature. Worn brushes can cause a lower level or performance, or cause the power tool to stop working altogether. Most power tools with a good amount of use will require the brushes to be replaced...
- Manufacturer Part Number:
- 582593-00
This is an OEM replacement part, sold individually. This Blade Clamp is a tool less blade clamp system. There are no tools needed to clamp the blade into the tool. It is secured to the shaft assembly by two hex head screws. To use this blade clamp, just press up on the black lever insert the blade and it is locked in the clamp. It is compatible with the Jigsaws listed below.
- Manufacturer Part Number:
- 089754-01
Genuine Black and Decker replacement part This brush is sold individually, 2 are needed for the tools shown below It is always best to replace both brushes, even if only one is worn. Worn brushes frequently are the cause behind a motor running poorly. Replacing brushes can fix a motor that's operating intermittently. New brushes can restore a motor's electric braking. Carbon brushes are one ...
- Manufacturer Part Number:
- 330004-06
This needle bearing is an authentic OEM part. This piece is used in DeWALT and Black & Decker power tools including various saws and grinders. Bearings buffer and secure moving parts while reducing friction. Needle bearings have long rollers rather than balls. Bearings are highly worn parts and may need replacement often. This part is sold individually. Included in part number 398618-00 Gear Case Assembly
- Manufacturer Part Number:
- 098000-11
This authentic manufacturer-supplied part is specially designed for use with DeWALT, Black and Decker and Delta saws. It is a special component that helps to secure and remove the hardware. It provides an identical replacement for a missing or a damaged wrench that was included with a new unit. Make sure to refer to the owner's manual for your model to ensure the correct application. One durable m...
- Manufacturer Part Number:
- 582827-00
This is a genuine OEM sourced replacement tapping screw which is specially designed for use with DeWALT and Black and Decker jigsaws. It is a generally utilized to secure the clamp plate, please make sure to refer to the appropriate diagrams for the correct location and application of this part. This high-quality hex socket bolt is made of durable metal and it is sold individually.
Black and Decker Jig Saw Models
-
Black and Decker JS660 (Type 1) Jigsaw Jig Saw
-
Black and Decker JS660 (Type 2) Jigsaw Jig Saw
-
Black and Decker SC500 (Type 4) Hand Saw Jig Saw
-
Black and Decker SC500 (Type 1) Hand Saw Jig Saw
-
Black and Decker JS700 (Type 1) Jigsaw Jig Saw
-
Black and Decker JS600 (Type 1) Jigsaw Jig Saw
-
Black and Decker JS500 (Type 2) Variable Speed Jig Saw
-
Black and Decker JS500 (Type 1) Variable Speed Jig Saw
-
Black and Decker FS5500JS Jigsaw Jig Saw
-
Black and Decker JS610GB (Type 1) Orbital Jig Saw
-
Black and Decker JS510G (Type 1) Jigsaw Jig Saw
-
Black and Decker 3157 (Type 100) Variable Speed Orbital Jig Saw
-
Black and Decker JS670V (Type 1) Linefinders Orbital Jigsaw Jig Saw
-
Black and Decker JS700LK (Type 1) Jig Saw
-
Black and Decker JS620GB Jig Saw
-
Black and Decker JS300 (Type 1) Jigsaw Jig Saw
-
Black and Decker JS300 (Type 2) Jigsaw Jig Saw
-
Black and Decker JS200 (Type 3) Jigsaw Jig Saw
-
Black and Decker 7530 (Type 1) 2-Speed Jig Saw
-
Black and Decker JS300 (Type 3) Jigsaw Jig Saw