OEM Jenny Compressor Parts & Accessories

Valve-suction

$17.32

Manufacturer Part Number:: 610-1031

This suction valve, also known as a discharge valve, is sourced from the original equipment manufacturer for use in air compressors. It is responsible for ensuring that air is drawn into the cylinder when the piston moves downward. When the piston moves back up during the compression stroke, the suction valve closes to prevent the compressed air from flowing back into the suction line. It includes...

Element-filter

★★★★★

(1)

$39.36

Manufacturer Part Number:: 150-1010

This is a genuine OEM supplied replacement element-filter, it is specially designed for use with Jenny pumps that are used to build pressure on air compressors. It is a high-quality component which helps to ensure the air that is supplied to the unit is free of dust or any other harmful contaminants. Over time filters will get dirty restricting the airflow and eventually requiring replacement to m...

Switch-psi

★★★★★

(1)

$114.00

Manufacturer Part Number:: 140-1074-01

This is a genuine Jenny replacement part. The PSI switch is designed by the manufacturer for use in compressors. This part is made of metal and high-quality plastic, and is connected to the manifold block in the side of the tank to help control the internal pressure of the tank. This product is supplied as an individual replacement part.

Gauge-psi

$38.59

Manufacturer Part Number:: 142-1003

This genuine manufacturer sourced gauge is designed for use with Jenny air compressors. The gauge registers pressure readings and allows you to maintain needed pressure. It provides an identical replacement for a damaged or a missing component that was installed on a new unit. Note, this high-quality gauge is sold as an individual item. You would need a wrench to secure this gauge to the manifold....

Valve-unloader

$18.82

Manufacturer Part Number:: 610-1042

Valve-pilot

★★★★★

(1)

$91.05

Manufacturer Part Number:: 141-1047

It is an authentic Jenny part which is supplied by the original equipment manufacturer for use with portable air compressors. The valve-pilot has a hand toggle unloader for easy starting. Factory preset yet can be adjusted for higher or lower pressures. Keep the compression fitting from your old one, and replace your old pilot valve with a new one. Check the owner's manual and the parts diagrams t...

Gasket-plate

$15.90

Manufacturer Part Number:: 104-1007

This is the gasket that helps to create an air tight seal between the valve plate and the cylinder, for correct application make sure to check appropriate diagram if your unit. Over time gaskets tend to deteriorate and crack eventually requiring replacement. It is a high quality replacement part that is supplied by original manufacturer for use with Jenny pumps. Please note this part is made with ...

Bearing-rod

$14.22

Manufacturer Part Number:: 150-1011

It is a genuine item that is supplied directly from the original equipment manufacturer for use with Jenny equipment. This is an identical replacement for a missing or damaged bearing-rod that was originally installed on a new unit, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this hardware. Keep in mind this high-quality item is m...

Gasket-cylinder

★★★★★

(1)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 104-1006

This is an OEM replacement part for use in Jenny stroke pumps and compressors. The cylinder gasket fits between the right bank and the left bank and helps to provide a seal. It might require a wrench to replace this part if it becomes broken. This is available as an individual replacement part and is made of a thin material.

Pad-rubber

$20.00

Manufacturer Part Number:: 104-1249

This is a genuine Jenny replacement part for use in compressors. The rubber pad attaches the portable dual tank. A hammer may be needed during the replacement of this part. It will need to be replaced if it breaks. This item is sold individually.

Gasket-head

★★★★★

(1)

$13.63

Manufacturer Part Number:: 104-1008

This is a genuine Jenny replacement part that is sourced from original equipment manufacturer for use with portable electric pumps. Its purpose is to make an air tight seal between the cylinder head and the valve plate. Over time gaskets tend to deteriorate and get compressed eventually requiring replacement. Please note one durable composite material gasket is included per order.

Discharge Valve

$17.32

Manufacturer Part Number:: 610-1032

This is the discharge valve assembly for a variety of pumps. This OEM valve assembly does not come with the pump head, but features a retaining clip, spring, valve disc and valve bumper, all of which measure approximately 1-inch in diameter. Over time, valves can collect debris or corrode, and with normal wear and tear, they can get damaged, leak, or restrict the flow of fluid through the pump. If...

Jenny Compressor Parts

Top Jenny Compressor Models

Popular Jenny Compressor Parts

Jenny Compressor Models

Jenny Compressor Parts

Search By Model or Part Number

Top Jenny Compressor Models

Popular Jenny Compressor Parts

Jenny Compressor Models