OEM Makita Nailer Parts & Accessories

O Ring 21

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 213379-2

This o-ring 21 is an OEM part direct from Makita. The flexible plastic ring is made for use with pneumatic nailers and rotary hammer tools. This item is often fitted between the compression spring and the driver, providing protection from friction. The o-ring 21 is sold individually. You will need a hex key for the repair.

Flat Washer 5

★★★★★

(1)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 941101-4

This item is a genuine Makita part that has been sourced from the original manufacturer to be used with trimmers, circular saws, sanders, routers, nailers, reciprocating saws, laminate trimmers, and planers. The flat washer is used with different types of power tools and the application of the washer can vary based on the model of the equipment. This item is available as an individual replacement part.

O-ring 5

★★★★★

(1)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 213021-5

O-rings are designed to contain thousands of pounds of pressure by creating a seal between two or more parts. O-ring measurements are defined by the inside diameter and the thickness. There are many causes for O-Ring failure, such as pressure, friction, temperature or chemicals. The most common are: • Extrusion and Nibbling - O-ring has ragged, tattered edges. These are commonly ...

Flat Washer

★★★★★

(3)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 253804-1

Genuine Makita replacement part, it is sold individually. This washer is used in various areas in the tool model numbers shown below. It is used as a washer for a screw or bolt or even as a spacer.

Switch V-15-3a6

★★★★★

(2)

$15.58

Manufacturer Part Number:: 651891-8

This replacement service switch is specially designed for use with Makita saws. It is a high-quality component which is supplied directly from the original equipment manufacturer. This part plays an important role because it controls the on/off function of the tool. Over time switch may develop mechanical or electrical issues eventually requiring replacement. It is a durable plastic body switch wh...

Urethane Ring 3

$5.95

Manufacturer Part Number:: 262054-7

This replacement urethane ring is a high quality item that is specially designed for Makita nailers. The purpose of this item is to create an air-tight seal for the pushing lever, for correct application make sure to check appropriate diagrams of your unit. Over time rings and seals will shrink, become brittle and crack eventually requiring a replacement. It is made from durable rubber and it is sold individually.

Nose Adapter, Af505n

$5.95

Manufacturer Part Number:: HY00000378

The nose adapter is a genuine Makita replacement part that has been OEM sourced to ensure a high level of quality. This item is intended to be used with brad nailers. This part attaches to the contact arm and is used to provide a stable connection between the contact arm and the material being nailed. This part also prevents marring on the surface of the trim being fastened. This part is sold as a...

Compression Spring 4

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 233101-1

This is an authentic replacement part manufactured for use with Makita pneumatic nailers and jigsaws. The special compression spring is used with different types of equipment and the application of the spring varies depending on the model of equipment. This compression spring is available as an individual replacement part, please see model diagram for part location and usage.

Driver Cpl.

★★★★★

(2)

$26.35

Manufacturer Part Number:: HY00000018

This genuine replacement piston driver assembly is sourced from the original equipment manufacturer for use with Makita nailers. It is the part of the nail gun that drives the nail into the material that is being used. These assemblies do have a tendency to bend or break if not used correctly or if you are driving nails into an extra hard material. Please note this assembly includes a metal piston...

Pressure Switch

★★★★★

(10)

$99.21

Manufacturer Part Number:: 412024-E

This is a manufacturer approved replacement part designed to work with Makita air compressors. The pressure switch tells your compressor when to stop and when to start. There are multiple reasons a pressure switch could be leaking air. If it is leaking air the pressure switch should be replaced for a compressor to operate properly and safely.

O Ring 45

★★★★★

(1)

$5.95

Minimum Quantity of 2 required

Manufacturer Part Number:: 213569-7

This is an original Makita replacement part manufactured for use with demolition hammers and pneumatic nailers. O-rings are typically used to form a seal between two assemblies or prevent damage from parts that are in contact. Worn out o-rings can effect the tools performance, and replacing worn o-rings is part of normal tool maintenance. This o-ring is sold individually, please see model diagram ...