Snapper Trimmer Parts
We sell only genuine OEM Snapper ® parts.
Top Snapper Trimmer Models
See All ModelsPopular Snapper Trimmer Parts
- Manufacturer Part Number:
- 530069572
This is a genuine manufacturer-sourced replacement part which is specially designed for handheld lawn and garden equipment. The switch allows a user to turn the unit on and off, please make sure to refer to the appropriate diagrams of your model for the correct location and application of this part. Unfortunately, over time components will wear out and may begin to fail eventually requiring a repl...
- Manufacturer Part Number:
- 530015162
It is a genuine item that is supplied by the original equipment manufacturer for handheld lawn and garden equipment. The wrist pin retainer is an important component which helps to secure the piston pin. If the part is missing or is damaged, this will provide an identical replacement for the original component that was installed on a new unit. Note, this high-quality wrist pin retainer is made of ...
- Manufacturer Part Number:
- 545227101
This is a genuine OEM sourced replacement part which is specially designed for use with handheld lawn and garden equipment. It is a standard hardware which has multiple applications depending on the model of your unit, please refer to appropriate diagrams for correct location and use of this hardware. This pan head screw is made of high-quality metal and it is sold individually.
- Manufacturer Part Number:
- 530055122
The metal clutch has been OEM sourced to be used with trimmers, pruners, and brushcutters from Poulan, Weed Eater, Husqvarna, and Jonsered. The clutch assembly fits into the clutch drum and is connected to the motor's drive shaft. The clutch allows the machine to idle without driving the cutting head. This part is sold as an individual item.
- Manufacturer Part Number:
- 530069247
This is the replacement fuel line 25 Inch for several OPE products that use small engines. The fuel line carries fuel from the tank to the carburetor. Over time, the fuel line can become badly clogged, and it can become brittle as well. When the fuel line is badly clogged or cracked, fuel can leak out and it can make it difficult to start or run the engine. To replace the fuel line, carefully disc...
- Manufacturer Part Number:
- 530047721
This is a genuine OEM replacement part, it is sold individually. By pressing on the Purge Bulb, it will force fuel into the fuel line from the fuel tank into the carburetor. Once the carburetor is full of fuel, the excess fuel will be purged back into the tank in the fuel return line. Over time the primer will lose its elasticity or crack and need to be replaced. We have an article and video on
- Manufacturer Part Number:
- 530095646
This Genuine OEM fuel filter is designed to maintain the performance and longevity of your equipment by preventing dirt and debris from entering the carburetor. Located inside the fuel tank, this essential component ensures clean fuel delivery, protecting the engine from potential damage caused by contaminants. Sold individually, the filter is built to meet original equipment standards for fit and...
- Manufacturer Part Number:
- 705514
This is a genuine Simplicity replacement part that has been OEM sourced to be used with trimmers. The cutting head attaches to the lower drive shaft and is used to store and rotate the trimming line. The cutting head is sold as an individual replacement part and is pre-assembled.
- Manufacturer Part Number:
- 530069216
This is the Genuine Craftsman replacement part. It is made out of Flexible Rubber and is Sold Individually. The purpose of the 530069216 Tank Purge Line is to return the excess fuel that is in the carburetor after the primer bulb has been pushed. The excess fuel is forced through the purge line back into the fuel tank. Over time the Tank Purge Line will become brittle and crack and will need to be replaced.
- Manufacturer Part Number:
- 545008011
The recoil starter spring is a genuine item that is supplied by the original equipment manufacturer for use with trimmers and blowers made by Poulan and Weed Eater. It attaches to the fan housing assembly and helps to retract the starter rope. To replace this item it may require the use of a screwdriver, a set of pliers, and a wrench. This high-quality part is made of metal and is priced individually.
- Manufacturer Part Number:
- 530030179
This is a genuine OEM sourced replacement part used with Poulan hedge trimmers. A spark plug delivers electric current from an ignition system to an internal combustion engine. After time spark plugs will become dirty or fouled. It is a good idea to replace the spark plug once this happens. This item is sold individually. You should gap your spark plug according to the owners manual of the outdoor...
- Manufacturer Part Number:
- 578931604