Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Craftsman Snowblower Snow Blower Replacement Parts For Model 536881114
Find Craftsman 536881114 Parts By Symptom
Drive system does not work
Auger will not turn
Will not blow snow
Popular Parts for Craftsman 536881114
Search Within Model
Questions & Answers for Craftsman 536881114
-
C-90
-
C-91
-
C-103
-
C-105
-
C-106
-
C-107
-
C-108
-
C-110
-
C-111
-
C-122
-
C-148
-
C-149
-
C-160
-
C-162
Screw, Hex Washer Head, Tap, Sems, 1/4-20 X 3/4Part Number: 1751355YPIn StockMinimum Quantity of 2 required$10.61 -
C-166
-
C-168
-
C-169
-
C-170
-
I-720
-
I-724
-
I-725
-
I-726
-
I-727
-
I-728
-
I-729
-
I-739
-
I-740
-
I-741
-
I-743
-
I-744
-
I-745
-
I-750
-
I-751
-
I-758
-
I-759
-
I-760
-
I-762
-
I-765
-
I-770
-
I-771
-
I-772
-
I-773
-
I-774
-
I-785
-
I-787
-
I-790
-
I-791
-
I-795
-
I-796
-
I-798
-
I-799
-
I-800
-
I-801
-
I-802
-
I-803
-
I-804
-
I-805
-
I-806
-
I-808
-
I-809
-
I-810
-
I-811
-
I-812
-
I-813
Questions & Answers
?
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
- < Prev
- 1
- Next >
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hello Jody, thank you for your question. Remove all the fuel from the fuel tank by running the engine until it stops or drain using a siphon pump. Remove the belt cover at the front of the engine. pull the auger pulley off the front engine pulley. Use a wrench to pivot the idler pulley toward the right. Lift the drive belt off of the drive pulley. Carefully pivot the snow thrower forward so it rests on the auger housing. Remove the frame cover from the underside of the snow thrower. Unscrew the screw and remove the spring. Use a clamp to the clamp the drive lever to the handle bar. Remove the old belt from around the auger pulley. Slip the belt between the support bracket and the auger pulley to replace. We hope this helps.