Our customer service team are at the ready daily to answer your part and product questions. We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
Craftsman Lawn Tractor Replacement Parts For Model 247288812 ((13AN77SS099)(2012))
Popular Parts for Craftsman 247288812 ((13AN77SS099)(2012))
Search Within Model
Questions & Answers for Craftsman 247288812 ((13AN77SS099)(2012))
-
Lawn Mower Flat Washer 5/8 X 1.0 X.030Part Number: 936-0336In StockMinimum Quantity of 2 required$6.55 -
Thrust Wash. 5/8-In. I.D. X 1-In. O.D. X .025-In. Thk.Part Number: 736-0495In StockMinimum Quantity of 2 required$7.75
-
Hex Washer Hd. Self-Tapping Scr. 5/16-18 x .75" Lg.Part Number: 710-1260AIn StockMinimum Quantity of 2 required$6.16
Questions & Answers
?
Ask our Team
We have a dedicated staff with decades of collective experience in helping customers just like you purchase parts to repair their products.
- < Prev
- 1
- Next >
Try using some different or simpler keywords, or submit your new question by using the "Ask a Question" button above!
Hello Richard, Thank you for your inquiry. We have researched your model and found the following installation instructions for you. Confirm that the mower deck is at its lowest position and that the clutch actuator lever is in the off position. Now remove the retaining pins securing the support arms and detach the arms to release the mower deck from the frame. Next release the deck belt from the engine pulley and the belt guides. Detach the clutch cable from the retainer and you can now slide the deck out from under the frame. Now pull off the steering wheel cover and use a 3/4 inch socket to loosen and unthread the mounting nuts securing the steering wheel. Remove the nut and washer then pull off the wheel, you can use a mallet to help loosen the adapter, then pull the adapter off now lift up the hood and use a 3/8 inch socket wrench to help unthread the fuel tank mounting bolts. Once you have the bolts removed set the tank aside and use a floor jack to lift up the front end of the mower use pliers to remove the spring clip securing the steering shaft. Use a 9/16 inch socket wrench to loosen and unthread the steering support mounting bolts nad slide off the steering support and washer then remove the old shaft. Insert the new shaft through the steering plate. then slide on the support and the washer, realign the support and replace the mounting bolts. Slide the shaft up through the bushing in the console and reinsert the spring clip to secure lower the front end of the mower. Reposition the fuel tank and secure it with the mounting bolts. Lower the hood and reposition the steering wheel adapter on the steering shaft. Align the steering wheel on the adapter then secure it with the nut and washer and snap on the steering wheel cover. Slide the mower deck back under the frame and secure the clutch cable in the retainer, then realign the belt on the engine pulley and the belt guides reposition the support arms and secure them using the washers where applicable and the retaining pins. Good luck with your repair.