Manifold Assembly 67701
Part Number: 67701
Order within the next 4 hours
and your part ships today!
and your part ships today!
Product Information
Description:
| This item is a genuine Weber replacement part that has been sourced from the original manufacturer to be used with outdoor gas grills. The manifold assembly attaches to the control panel and the frame. This item is used to link the fuel tank to supply the burners with fuel. The item is a complete part that is pre-assembled and is priced as a single item. |
Compatibility
This part is compatible with the following machines:
the 12 compatible machines
Repair Guides
![]()
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
Questions & Answers for Manifold Assembly
No questions have been asked yet
Repair Instructions: Submitted by Customers Like You
2 of 2 people found this instruction helpful
Tool Type:
Outdoor Grill
Repair Difficulty:
Medium
Time Spent Repairing:
1-2 hours
Tools Used:
Screwdriver, Pliers, Power Drill, Nutdriver
Not a direct replacement. No ears on the manifold. Had to support with zip ties
Most instructions were good but the manifold is not a direct replacement as stated in the order. Had to support the manifold with zip ties as it did not have the metal wings that supported the manifold in the slots as original equipment.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
1 of 1 people found this instruction helpful
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Socket set, Wrench Set
One of the gas valves would not operate.
Removed the valve knobs and electronic starter button.
Disconnected the regulator from the fuel tank
Removed the steel cover plates (1 screw).
Disconnected the gas feed tube from the old manifold.
Removed the manifold support (1 screw).
Removed 2 nuts on manifold brackets.
Removed old manifold.
Installed manifold support
Installed new manifold with 2 nuts.
Reconnected gas tube, regulator, and reassembled cover plate, knobs, and starter button.
Disconnected the regulator from the fuel tank
Removed the steel cover plates (1 screw).
Disconnected the gas feed tube from the old manifold.
Removed the manifold support (1 screw).
Removed 2 nuts on manifold brackets.
Removed old manifold.
Installed manifold support
Installed new manifold with 2 nuts.
Reconnected gas tube, regulator, and reassembled cover plate, knobs, and starter button.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Socket set
Gas was not flowing to burners.
1. Removed the Weber burner control deck and knobs.
2. Unfastened 2 bolts holding manifold in place and gas line to side stove
3. Slid manifold off of 3 venturi/burner tubes
4. Installed and attached new manifold to venturi tubes and bolted in place
5. Attached side stove and gas tank gas lines
6. Reinstalled burner control deck and knobs, then tested successfully.
2. Unfastened 2 bolts holding manifold in place and gas line to side stove
3. Slid manifold off of 3 venturi/burner tubes
4. Installed and attached new manifold to venturi tubes and bolted in place
5. Attached side stove and gas tank gas lines
6. Reinstalled burner control deck and knobs, then tested successfully.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Parts Used:
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Screwdriver, Adjustable Wrench
Valves were not working properly - not shutting all the way, opening too much
Part came with directions. Super easy installation. Grill performs like new. Very worthwhile investment in time and money.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Outdoor Grill
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
Socket set
Low flow and yellow flame
Replaced side burner orifice (3 minutes max ) and the manifold for the 3 burners. Total time less than 30 minutes. Very easy repair.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Product Information
Repair Guides
![]()
Articles:
|
Having trouble getting your grill to light up? A common cause of this issue is a defective ignition switch. We'll sho...
November 08, 2012
|
