eReplacementParts.com
877-346-4814
Karcher Parts

Install
Videos!
Male Adapter - 9.134-019.0:Karcher 360 View
Male Adapter - 9.134-019.0:KarcherMale Adapter - 9.134-019.0:KarcherMale Adapter - 9.134-019.0:Karcher 360 View

Male Adapter 9.134-019.0

Part Number: 9.134-019.0
Karcher
Availability: In Stock
Price: $4.99
Ships within 1 business day
Product Information
Description:
Genuine Karcher replacement part, this item is sold individually.
The purpose of this part, is to attach the Female Hose Connector to the Piston Guide.
This part is made of plastic and has plastic threads that do wear out.
It may be wise to have an extra one or two on hand.
Frequently Purchased With
Products Compatibility

This item works with the following types of products:

  • • Pressure Washer
Repair Guides
Watch the Repair Video for Male Adapter

Questions & Answers for Male Adapter


Is this the fitting where garden hose attaches to pump? I don't see where hose attaches
Ben for model number G 2600 VC Plus asked on 2022-09-16
Hello Ben, Thank you for contacting us. We have researched the model you have provided and have found the part you are looking for is Part Number:9.134-019.0 for the adapter for the Garden Hose. Thank you for your inquiry, good luck with this repair!
eReplacementParts Team September 16, 2022
Repair Instructions: Submitted by Customers Like You
14 of 14 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Male Adapter - 9.134-019.0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, allen wrench & channel locks
Male adaptor stripped out threads
Replace bad part. Screw in new part with allen wrench.
Would be nice if a brass hose adaptor was used instead of plastic. Then this would not be necessary!!!
Did you find this story helpful?
Thanks for voting and helping fellow customers!
5 of 5 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
O-ring Seal 15,6 X 1,78-nbr 70 - 6.362-634.0
Male Adapter - 9.134-019.0
Filter Seal-hose Connector- - 9.181-005.0
Female Hose Connector - 9.155-013.0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Pliers
The male adapter for the hose connection assembly was broken and popped out under pressure.
Removed old assembly. Placed new o-ring on the male adapter, inserted in hose connector, and screwed into pressure washer. Then inserted filter seal hose connector.

The illustrated parts breakdown was critical to identifying the proper parts.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
3 of 3 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Male Adapter - 9.134-019.0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver
The plastic adapter that feeds through the female hose coupling and into the pump was constantly coming loose and leaking water.
The repair is very simple:
1. You need to remove the hose if attached.
2. Use a thin bladed screwdriver to remove the metal screen & washer that sit in the female hose coupling( it blocks access to the plastic adapter)
3. Use a wide-bladed screwdriver or chisel to unscrew the adapter from the pump.
4. Once removed, insert a new plastic adapter through the female hose coupling and screw it back into the pump.
5. Replace the metal screen & washer into the hose coupling & you're ready to go.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
Male Adapter - 9.134-019.0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Wrench Set
1X male adapter was broken off inside pump inlet.
Used an Allen wrench to remove the broken one. Then screwed the new one in with Teflon tape. It was easier than fixing a sprinkler riser.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
2 of 2 people found this instruction helpful
Tool Type:
Pressure Washer
Parts Used:
O-ring Seal 15,6 X 1,78-nbr 70 - 6.362-634.0
Male Adapter - 9.134-019.0
Filter Seal-hose Connector- - 9.181-005.0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Screwdriver, Pliers, None
Leaking at hose inlet to pressure washer
The plastic fine threads on the adapter pulled out and it was leaking there. Also the attached seal to the inlet screen also leaked. Removed worn parts and reinstalled male adapter, used a wide tip screwdriver that I inserted into adapter to screw it into pressure washer. Then pressed in screen filter and gasket. Worked fine, no leak at hose inlet into pressure washer.



Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Pressure Washer
Parts Used:
Male Adapter - 9.134-019.0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
Adjustable Wrench, Large Allen Wrench
Plastic connection between power washer pump and water filter assembly broke.
1. Removed water filter assembly.
2. removed rubber washer holding plastic adapter.
3. Remover remaining plastic piece from flange nut that was attached to water filter assembly.
4. Using Allen wrench, removed broken adapter from the power washer pump assembly.
5. Placed new plastic adapter in flange nut and added a new hose washer
6. Using the Allen wrench tightened new piece to the power washer pump assembly
7. Attached the water filter assembly back onto the flange nut and tightened with wrench.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Pressure Washer
Parts Used:
Male Adapter - 9.134-019.0
O-ring Seal 15,6 X 1,78 - 6.362-390.0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
Plastic fitting was worn/leaked
Used Allen wrench to secure fitting into pump
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Pressure Washer
Parts Used:
Male Adapter - 9.134-019.0
Female Hose Connector - 9.155-013.0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Star Socket
Water hose pulled connection off pressure washer pump and stripped rubber threads
Screwed in new male piece with new brass piece for hose including new rubber hose seal. No leaks and ordered spare in case it got pulled out again.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Pressure Washer
Parts Used:
O-ring Seal 15,6 X 1,78-nbr 70 - 6.362-634.0
Male Adapter - 9.134-019.0
Repair Difficulty:
Easy
Time Spent Repairing:
15-30 minutes
Tools Used:
, Large allen wrench
Fitting broke
Easy install but you will need a allen wrench that isn't included.
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Tool Type:
Pressure Washer
Parts Used:
O-ring Seal 15,6 X 1,78-nbr 70 - 6.362-634.0
Male Adapter - 9.134-019.0
Filter Seal-hose Connector- - 9.181-005.0
Female Hose Connector - 9.155-013.0
Repair Difficulty:
Easy
Time Spent Repairing:
Less than 15 minutes
Tools Used:
, Allen wrench
The hose inlet fitting to the pressure washer was broken
Removed piece of inlet fitting from pump assembly
Assembled fitting with o ring and female connector
Tightened fitting into pump housing
Added hose washer and screen
Did you find this story helpful?
Thanks for voting and helping fellow customers!
Reviews
4.8
Average Rating (out of 5):
24 Reviews
Click to filter by ratings:
5 stars
21
4 stars
2
3 stars
0
2 stars
0
1 stars
1
  • Highest Rating
  • Most Recent
< PREV
  • 1
  • 2
  • 3
NEXT >
  • Just what I needed.
    This was the part I needed to replace the broken one.
    Guest - 5 days ago Verified Purchase
    Works great on my Karcher power washer
    Exact replacement part for my Karcher power washer. Ordering was fast and easy and delivery was on time. No complaints here whatsoever.
    Guest - July 10, 2023 Verified Purchase
    Water Inlet hose male adapter
    The water hose connecting to my Karcher pressure washer kept blasting loose and disconnecting. This male inlet hose adapter solved the problem. Parts arrived in time specified and fit perfectly. Pressure washer works like new again. Thanks Ereplacement Parts
    Guest - November 29, 2022 Verified Purchase
    Part worked perfectly
    Part arrived as expected, made the repair easy!
    Guest - November 19, 2022 Verified Purchase
    Surprised they had it.
    I haven’t tried to use the piece yet but it looks right. Thanks!
    Guest - July 28, 2022 Verified Purchase
    Worked as expected.
    Worked as expected.
    Guest - December 29, 2021 Verified Purchase
    The part doesn't include the ring washer but, other than that it works.
    I ordered 5 of these because they are easily damaged. It was a bad idea for Karcher to design their pressure washer with a plastic component that threads into metal housing
    Guest - November 13, 2021 Verified Purchase
    The part I needed
    The part arrived quickly and fit perfectly into my power washer.
    Guest - September 18, 2021 Verified Purchase
    Everything worked
    Ordered a plastic water intake adapter that fit in the Karcher 3000 psi pressure washer. The original part was disintegrating and blowing the garden hose attachment unpredictably. The part that was sent to me in a few days, was exactly right. I also ordered an O ring that was not on my pressure washer, probably blown off, but it stopped the leaking intake water. The UTube video was very good and after watching it carefully a few times, i made the repair satisfactorily.
    Guest - August 30, 2021 Verified Purchase
    Perfect Match
    Was the exact part. The old one was stripped. Power washer works again!!
    iGlobal - June 10, 2021 Verified Purchase
    Verified Purchase
    eReplacementParts Team
    • Highest Rating
    • Most Recent
    < PREV
    • 1
    • 2
    • 3
    NEXT >
    Product Information
    Repair Guides
    Watch the Repair Video for Male Adapter
    eReplacementParts.com
    7174 South 400 West
    Suite 5
    Midvale, UT 84047
    visa mastercard discover american express PayPal